The sdcard works fine with 2020.10
Just to satisfy everyone I tried with a brand new 64GB sdcard and, as expected (by me at least), it does not work.
Replacing dtoverlay vc4-kms-v3d with vc4-fkms-v3d works fineāish as the interface is veeeeeeery slow
What firmware version are you referring to?
The RPi. Iām not sure what else could be different between the two people reporting this issue and everyone else.
~$ sudo /opt/vc/bin/vcgencmd version
Mar 10 2021 10:13:46
Copyright (c) 2012 Broadcom
version 4b9ea44619376439c801684745a12299b45ae2bb (clean) (release) (start_x)
mine reports the same version:
osmc@osmc:~$ vcgencmd version
Mar 10 2021 10:15:19
Copyright (c) 2012 Broadcom
version 4b9ea44619376439c801684745a12299b45ae2bb (clean) (release) (start_x)
Sorry, wrong command. That apparently is what is being loaded off of the SD card during boot. How about this oneā¦
~$ vcgencmd bootloader_version
Sep 3 2020 13:11:43
version c305221a6d7e532693cc7ff57fddfc8649def167 (release)
timestamp 1599135103
update-time 0
capabilities 0x00000000
Just to clarify, Im booting with lirc-rpi overlay I cannot get it to boot with kms.
root@osmc:/home/osmc# vcgencmd bootloader_version
unknown
Just for the sake of doing it, i did run rpi-update (it updated something) with same results, no HDMI output with kms.
Iām sure he is pretty busy right now but perhaps @sam_nazarko can take a look at this thread when he gets a chance.
No news about this problem? Iām back to 2020.11 Wich works like a champ with my tv.
It seems like the new osmc release is having this same problem in different ways.
Iāve just tried a clean install of 2022.9 and this issue is still happening, iāve even change my TV setup but still a blank screen after boot. Curiously what the installer does (partition and installin files) can be seen , but just after that and with every reboot after what I get is a blank screen.
Iām still keeping my 2020.11 install for now.
You may need to provide an EDID or video mode manuallyā¦