PIFI DIGI+ Raspberry PI 2 NO SOUND

Help and Support
1

Hello, few days ago i bought these dac from china

Dac shipped today, and the problems begins …

I try all tutorials from hifiberry sites, i also try HiFiBerry_Installer and nothing change.
i chose output device in openelec settings → ALSA: Default (snd_rpi_hifiberry_digi S/PDIF
everything is ok spdif led is light but i didnt hear any sound :frowning:

osmc@osmc:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_digi], device 0: HifiBerry Digi HiFi wm8804-spdif-0
Subdevices: 0/1
Subdevice #0: subdevice #0
osmc@osmc:~$

Any advice ?
sory for my poor english
best regards
Pawel

2

We don’t provide openelec support here.

3

SORY, i try openelec but i use OSMC now

4
5

Thanks Actiona, i have got disable LIRC GPIO hardware support in Hardware settings :frowning: its dosnt work

6

Well, it seems that your device must be some sort of imitation hifiberry that may likely not be recognized or perform in the same manner as the original.

7

Do not enable the HifiBerry overlay unless it’s a HifiBerry.

There may be a different overlay that you can use in OSMC Settings.

What does dmesg give you?

Sam

8

I have the same device. After using it on openelec for some time (some help over the shell is necessary there), today I installed osmc. It works without any issues using the hifiberry-digi… overlay. Of course then it depends: I have an older receiver so I want the audio to go there over spdif (lacking hdmi). And it does. So what is the problem exactly?

9

I make a fresh install of OSMC from HiFiBerry_Installer, i only change the audio output to ALSA: Default (snd_rpi_hifiberry_digi S/PDIF And its still silence :frowning:

10

So did you enable the Hifiberry overlay in PiConfig? Did you reboot after doing this?

11 
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sat Oct 24 19:05:11 2015 from 192.168.0.99
osmc@osmc:~$ dmesg
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.1-1-osmc (root@vero) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Wed Sep 23 17:57:49 UTC 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] cma: Reserved 8 MiB at 0x2e800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 192512
[    0.000000] free_area_init_node: node 0, pgdat 80a48440, node_mem_map ae156000
[    0.000000]   Normal zone: 1692 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192512 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9460->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 12 pages/cpu @ae118000 s19328 r8192 d21632 u49152
[    0.000000] pcpu-alloc: s19328 r8192 d21632 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190820
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0x34ece0be smsc95xx.macaddr=B8:27:EB:EC:E0:BE bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet osmcdev=rbp2
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 742668K/770048K available (7748K kernel code, 550K rwdata, 1820K rodata, 412K init, 762K bss, 19188K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xaf800000 - 0xff000000   (1272 MB)
    lowmem  : 0x80000000 - 0xaf000000   ( 752 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x80960324   (9569 kB)
      .init : 0x80961000 - 0x809c8000   ( 412 kB)
      .data : 0x809c8000 - 0x80a51aec   ( 551 kB)
       .bss : 0x80a54000 - 0x80b12a4c   ( 763 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:608
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000032] Switching to timer-based delay loop, resolution 52ns
[    0.000304] Console: colour dummy device 80x30
[    0.000529] console [tty0] enabled
[    0.000555] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000584] pid_max: default: 32768 minimum: 301
[    0.000980] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001002] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002240] Initializing cgroup subsys blkio
[    0.002283] Initializing cgroup subsys memory
[    0.002322] Initializing cgroup subsys devices
[    0.002347] Initializing cgroup subsys freezer
[    0.002388] Initializing cgroup subsys net_cls
[    0.002462] CPU: Testing write buffer coherency: ok
[    0.002546] ftrace: allocating 19043 entries in 56 pages
[    0.049072] CPU0: update cpu_capacity 1024
[    0.049112] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.049129] [bcm2709_smp_prepare_cpus] enter
[    0.049267] Setting up static identity map for 0x8240 - 0x8298
[    0.078978] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.079337] [bcm2709_secondary_init] enter cpu:1
[    0.079392] CPU1: update cpu_capacity 1024
[    0.079401] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.088953] [bcm2709_boot_secondary] cpu:2 started (0) 17
[    0.089237] [bcm2709_secondary_init] enter cpu:2
[    0.089271] CPU2: update cpu_capacity 1024
[    0.089280] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.098966] [bcm2709_boot_secondary] cpu:3 started (0) 17
[    0.099219] [bcm2709_secondary_init] enter cpu:3
[    0.099249] CPU3: update cpu_capacity 1024
[    0.099257] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.099350] Brought up 4 CPUs
[    0.099380] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.099391] CPU: All CPU(s) started in SVC mode.
[    0.100391] devtmpfs: initialized
[    0.123017] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.123548] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.124638] pinctrl core: initialized pinctrl subsystem
[    0.125432] NET: Registered protocol family 16
[    0.130869] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.158786] cpuidle: using governor ladder
[    0.188816] cpuidle: using governor menu
[    0.188951] bcm2709.uart_clock = 3000000
[    0.196290] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.196310] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.196512] Serial: AMBA PL011 UART driver
[    0.196832] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
[    0.197526] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.270536] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
[    0.270592] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
[    0.271698] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
[    0.271717] bcm2708-dmaengine 3f007000.dma: dma_debug:0
[    0.272302] SCSI subsystem initialized
[    0.272544] usbcore: registered new interface driver usbfs
[    0.272655] usbcore: registered new interface driver hub
[    0.272823] usbcore: registered new device driver usb
[    0.273592] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-09-23 12:21
[    0.300696] clocksource: Switched to clocksource arch_sys_counter
[    0.351589] FS-Cache: Loaded
[    0.352046] CacheFiles: Loaded
[    0.368574] NET: Registered protocol family 2
[    0.369813] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.369955] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.370148] TCP: Hash tables configured (established 8192 bind 8192)
[    0.370276] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.370341] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.370756] NET: Registered protocol family 1
[    0.371361] RPC: Registered named UNIX socket transport module.
[    0.371380] RPC: Registered udp transport module.
[    0.371391] RPC: Registered tcp transport module.
[    0.371402] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.371966] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.374516] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.374722] audit: initializing netlink subsys (disabled)
[    0.374787] audit: type=2000 audit(0.349:1): initialized
[    0.390143] VFS: Disk quotas dquot_6.6.0
[    0.390526] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.393350] FS-Cache: Netfs 'nfs' registered for caching
[    0.394506] NFS: Registering the id_resolver key type
[    0.394581] Key type id_resolver registered
[    0.394594] Key type id_legacy registered
[    0.397533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.397735] io scheduler noop registered
[    0.398304] io scheduler bfq registered (default)
[    0.398316] BFQ I/O-scheduler version: v7r7
[    0.400863] BCM2708FB: allocated DMA memory eec00000
[    0.400911] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.435112] Console: switching to colour frame buffer device 240x67
[    0.457933] vc-cma: Videocore CMA driver
[    0.457951] vc-cma: vc_cma_base      = 0x00000000
[    0.457964] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.457975] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.458276] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    0.476397] brd: module loaded
[    0.486185] loop: module loaded
[    0.487330] vchiq: vchiq_init_state: slot_zero = 0xaec80000, is_master = 0
[    0.489199] Loading iSCSI transport class v2.0-870.
[    0.490131] usbcore: registered new interface driver smsc95xx
[    0.490206] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.690583] Core Release: 2.80a
[    0.690621] Setting default values for core params
[    0.690649] Finished setting default values for core params
[    0.891111] Using Buffer DMA mode
[    0.891129] Periodic Transfer Interrupt Enhancement - disabled
[    0.891139] Multiprocessor Interrupt Enhancement - disabled
[    0.891151] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.891168] Dedicated Tx FIFOs mode
[    0.891609] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xaec14000 dma = 0xeec14000 len=9024
[    0.891650] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[    0.891675] dwc_otg: Microframe scheduler enabled
[    0.891745] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x8054c124
[    0.891767] WARN::hcd_init_fiq:413: FIQ ASM at 0x8054c494 length 36
[    0.891787] WARN::hcd_init_fiq:438: MPHI regs_base at 0xaf89a000
[    0.891839] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.891893] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.891947] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
[    0.892002] Init: Port Power? op_state=1
[    0.892012] Init: Power Port (0)
[    0.892329] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.892349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.892365] usb usb1: Product: DWC OTG Controller
[    0.892381] usb usb1: Manufacturer: Linux 4.2.1-1-osmc dwc_otg_hcd
[    0.892396] usb usb1: SerialNumber: 3f980000.usb
[    0.893576] hub 1-0:1.0: USB hub found
[    0.893645] hub 1-0:1.0: 1 port detected
[    0.894487] dwc_otg: FIQ enabled
[    0.894502] dwc_otg: NAK holdoff enabled
[    0.894513] dwc_otg: FIQ split-transaction FSM enabled
[    0.894554] Module dwc_common_port init
[    0.894902] usbcore: registered new interface driver usb-storage
[    0.895285] mousedev: PS/2 mouse device common for all mice
[    0.895881] usbcore: registered new interface driver usbtouchscreen
[    0.896369] bcm2835-cpufreq: min=600000 max=900000
[    0.899281] sdhci: Secure Digital Host Controller Interface driver
[    0.899290] sdhci: Copyright(c) Pierre Ossman
[    0.899648] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    0.899663] mmc-bcm2835 3f300000.mmc: DMA channels allocated
[    0.930812] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.931315] ledtrig-cpu: registered to indicate activity on CPUs
[    0.931460] hidraw: raw HID events driver (C) Jiri Kosina
[    0.931644] usbcore: registered new interface driver usbhid
[    0.931653] usbhid: USB HID core driver
[    0.931937] Initializing XFRM netlink socket
[    0.931972] NET: Registered protocol family 17
[    0.932108] Key type dns_resolver registered
[    0.932290] Registering SWP/SWPB emulation handler
[    0.937375] registered taskstats version 1
[    0.937568] vc-sm: Videocore shared memory driver
[    0.937583] [vc_sm_connected_init]: start
[    0.940179] [vc_sm_connected_init]: end - returning 0
[    0.942386] Waiting for root device /dev/mmcblk0p2...
[    0.968370] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.970365] mmc0: new high speed SDHC card at address 0007
[    0.971025] mmcblk0: mmc0:0007 SD16G 14.9 GiB
[    0.972182]  mmcblk0: p1 p2
[    1.053788] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    1.053805] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    1.090817] Indeed it is in host mode hprt0 = 00021501
[    1.270729] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.270886] Indeed it is in host mode hprt0 = 00001101
[    1.471101] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.471126] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.471940] hub 1-1:1.0: USB hub found
[    1.472059] hub 1-1:1.0: 5 ports detected
[    1.750783] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.851114] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.851138] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.854046] smsc95xx v1.0.4
[    1.914134] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ec:e0:be
[    2.150772] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
[    2.272205] usb 1-1.4: New USB device found, idVendor=1997, idProduct=1221
[    2.272230] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.272241] usb 1-1.4: Product: Wireless Air mouse Keyboard
[    2.272255] usb 1-1.4: Manufacturer:
[    2.286979] input:   Wireless Air mouse Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1997:1221.0001/input/input0
[    2.341811] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [  Wireless Air mouse Keyboard] on usb-3f980000.usb-1.4/input0
[    2.363164] input:   Wireless Air mouse Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:1221.0002/input/input1
[    2.421293] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [  Wireless Air mouse Keyboard] on usb-3f980000.usb-1.4/input1
[    5.409143] random: nonblocking pool is initialized
[    7.030721] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[    7.132534] usb 1-1.3: New USB device found, idVendor=067b, idProduct=2506
[    7.132549] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.132562] usb 1-1.3: Product: Mass Storage Device
[    7.132572] usb 1-1.3: Manufacturer: Prolific Technology Inc.
[    7.132582] usb 1-1.3: SerialNumber: 0
[    7.133492] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    7.133852] scsi host0: usb-storage 1-1.3:1.0
[    8.166250] scsi 0:0:0:0: Direct-Access     ST2000DM 001-1ER164       CC25 PQ: 0 ANSI: 0
[    8.168274] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    8.168778] sd 0:0:0:0: [sda] Write Protect is off
[    8.168796] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[    8.169295] sd 0:0:0:0: [sda] No Caching mode page found
[    8.169310] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    8.192526]  sda: sda1 < sda5 >
[    8.195231] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.974992] EXT4-fs (mmcblk0p2): recovery complete
[   13.981466] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   13.981535] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[   13.981680] devtmpfs: mounted
[   13.982201] Freeing unused kernel memory: 412K (80961000 - 809c8000)
[   15.486226] NET: Registered protocol family 10
[   15.496850] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
[   15.726768] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   15.726986] systemd[1]: Found ordering cycle on basic.target/start
[   15.727008] systemd[1]: Found dependency on sysinit.target/start
[   15.727028] systemd[1]: Found dependency on kbd.service/start
[   15.727047] systemd[1]: Found dependency on remote-fs.target/start
[   15.727064] systemd[1]: Found dependency on remote-fs-pre.target/start
[   15.727081] systemd[1]: Found dependency on connman.service/start
[   15.727097] systemd[1]: Found dependency on dbus.service/start
[   15.727113] systemd[1]: Found dependency on basic.target/start
[   15.727130] systemd[1]: Breaking ordering cycle by deleting job kbd.service/start
[   15.727150] systemd[1]: Job kbd.service/start deleted to break ordering cycle starting with basic.target/start
[   15.727418] systemd[1]: Found ordering cycle on basic.target/start
[   15.727441] systemd[1]: Found dependency on sysinit.target/start
[   15.727460] systemd[1]: Found dependency on rpcbind.service/start
[   15.727479] systemd[1]: Found dependency on network-online.target/start
[   15.727496] systemd[1]: Found dependency on network.target/start
[   15.727512] systemd[1]: Found dependency on connman.service/start
[   15.727529] systemd[1]: Found dependency on dbus.service/start
[   15.727545] systemd[1]: Found dependency on basic.target/start
[   15.727562] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[   15.727581] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[   15.816898] fuse init (API version 7.23)
[   15.854606] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   15.991889] systemd-udevd[126]: starting version 215
[   16.269170] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
[   16.276541] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[   16.406275] snd-hifiberry-digi sound: ASoC: CPU DAI (null) not registered
[   16.406303] snd-hifiberry-digi sound: snd_soc_register_card() failed: -517
[   16.408400] snd-hifiberry-digi sound: ASoC: CODEC DAI wm8804-spdif not registered
[   16.408425] snd-hifiberry-digi sound: snd_soc_register_card() failed: -517
[   16.425306] wm8804 1-003b: revision E
[   16.430364] snd-hifiberry-digi sound: wm8804-spdif <-> 3f203000.i2s mapping ok
[   16.465581] usbcore: registered new interface driver uas
[   16.476490] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.707244] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   17.614241] systemd-journald[107]: Received request to flush runtime journal from PID 1
[   17.833308] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   17.833766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.396869] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.398945] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[   19.602546] 8021q: 802.1Q VLAN Support v1.8
[   43.448930] Console: switching to colour dummy device 80x30

MOD EDIT: Please use the preformatted code tags for long runs of code

12

i turn on hifiberry digi overlay and its still silence

13

i found a problem now in dmesg

3.566779] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

[ 3.568415] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
[ 3.671022] snd-hifiberry-digi sound: ASoC: CPU DAI (null) not registered
[ 3.671051] snd-hifiberry-digi sound: snd_soc_register_card() failed: -517
[ 3.680779] wm8804 1-003b: revision E
[ 3.684051] snd-hifiberry-digi sound: ASoC: CPU DAI (null) not registered
[ 3.684072] snd-hifiberry-digi sound: snd_soc_register_card() failed: -517
[ 3.696466] snd-hifiberry-digi sound: wm8804-spdif <-> 3f203000.i2s mapping ok

But i don’t really know how to repair that ?

14

Your main issue here seems to be file system corruption. Are you saying that this is a fresh install made today? Are you pulling the power plug instead of shutting the system down cleanly? Is it crashing randomly on you for some reason? These are possible causes of corruption. Also possible that your sdcard has some type of issue. Do you have another linux system that you can use to fsck the ext4 partition of your card?

15

This is why you are having issues. Are you on Pi 1? There was a regression that broke HifiBerry cards temporarily. Upgrading via My OSMC should fix it.

Otherwise, I suggested cleaning the contacts and reseating the device.

Sam

16

I use Raspberry PI 2 (quad core).
I make that install of OSMC TODAY ITS FULL FRESH
i use the HiFiBerry_Installer.exe to make sd card

17

Don’t do this. I have no idea what it is but you should be using OUR installer.

18

I dont have another linux system on any device, and i dont kill the system with power plug.

19

Thanks guys, now i try to make fresh install of OSMC from osmc.tv on another SD card

20

While the HifiBerry installer uses an official preseed mechanism, the image is outdated. To use the new DMA engine and take advantage of on device clock generation (for low jitter), please download from osmc.tv.

You don’t need Linux – just grab the Windows installer.

Sam