Raspberry pi 2 after ugrade to v19.1 cant set gpu_mem

darwindesign · 11 August 2021 03:38

If I’m understanding these posts correctly it looks like it is not, and will not, be possible to adjust memory in the config-user.txt (includes) file.

github.com/raspberrypi/firmware

gpu_mem not effective when not placed in config.txt but included extraconfig.txt

opened 01:41PM - 10 Feb 20 UTC

gvolt

**Describe the bug** As stated in the documentation (https://www.raspberrypi.…org/documentation/configuration/config-txt/misc.md) the `include` option "Causes the content of the specified file to be inserted into the current file.". This currently does not work for the gpu_mem* options: Setting gpu_mem not in /boot/config.txt but in a file that is "linked" by the `include` option in /boot/config.txt has no effect. **To reproduce** 1. Remove any gpu_mem* settings from /boot/config.txt. 2. Add `include extraconfig.txt` to /boot/config.txt. 3. Create /boot/extraconfig.txt. 4. Add `gpu_mem=32` to /boot/extraconfig.txt. **Expected behaviour** GPU memory should be set to the value given by the gpu_mem option in the file referenced by the `include` option in /boot/config.txt. In the example GPU memory should be: 32MB **Actual behaviour** The gpu_mem setting is not obeyed if it is placed in a file that is referenced by the `include` option in /boot/config.txt. In the example on a RPi3B+ `vcgencmg get_mem gpu` shows a GPU memory of 76MB instead of 32MB. **System** Copy and paste the results of the raspinfo command in to this section. Alternatively, copy and paste a pastebin link, or add answers to the following questions: Which model of Raspberry Pi? Pi3B+ v1.3 Which OS and version (cat /etc/rpi-issue)? Raspbian GNU/Linux 9 \n \l => 2019-04-08-raspbian-stretch-lite Which firmware version (vcgencmd version)? Aug 15 2019 12:06:42 Copyright (c) 2012 Broadcom version 0e6daa5106dd4164474616408e0dc24f997ffcf3 (clean) (release) (start) Which kernel version (uname -a)? Linux xxxx 4.19.66-v7+ #1253 SMP Thu Aug 15 11:49:46 BST 2019 armv7l GNU/Linux **Logs** sudo vcdbg log msg 001138.687: brfs: File read: /mfs/sd/config.txt 001138.840: brfs: File read: 1625 bytes 001139.534: brfs: File read: /mfs/sd/extraconfig.txt 001140.422: brfs: File read: 11 bytes 001150.945: HDMI:EDID error reading EDID block 0 attempt 0 001152.251: HDMI:EDID error reading EDID block 0 attempt 1 001153.549: HDMI:EDID error reading EDID block 0 attempt 2 001154.847: HDMI:EDID error reading EDID block 0 attempt 3 001156.145: HDMI:EDID error reading EDID block 0 attempt 4 001157.443: HDMI:EDID error reading EDID block 0 attempt 5 001158.741: HDMI:EDID error reading EDID block 0 attempt 6 001160.039: HDMI:EDID error reading EDID block 0 attempt 7 001161.337: HDMI:EDID error reading EDID block 0 attempt 8 001162.635: HDMI:EDID error reading EDID block 0 attempt 9 001163.697: HDMI:EDID giving up on reading EDID block 0 001164.058: HDMI:EDID error reading EDID block 0 attempt 0 001165.353: HDMI:EDID error reading EDID block 0 attempt 1 001166.646: HDMI:EDID error reading EDID block 0 attempt 2 001167.941: HDMI:EDID error reading EDID block 0 attempt 3 001169.234: HDMI:EDID error reading EDID block 0 attempt 4 001170.529: HDMI:EDID error reading EDID block 0 attempt 5 001171.823: HDMI:EDID error reading EDID block 0 attempt 6 001173.117: HDMI:EDID error reading EDID block 0 attempt 7 001174.410: HDMI:EDID error reading EDID block 0 attempt 8 001175.705: HDMI:EDID error reading EDID block 0 attempt 9 001176.762: HDMI:EDID giving up on reading EDID block 0 001194.943: brfs: File read: /mfs/sd/config.txt 001195.103: brfs: File read: 1625 bytes 001195.795: brfs: File read: /mfs/sd/extraconfig.txt 001416.598: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined 001418.688: *** Restart logging 001418.754: brfs: File read: 11 bytes 001419.505: hdmi: HDMI:EDID error reading EDID block 0 attempt 0 001420.814: hdmi: HDMI:EDID error reading EDID block 0 attempt 1 001422.117: hdmi: HDMI:EDID error reading EDID block 0 attempt 2 001423.420: hdmi: HDMI:EDID error reading EDID block 0 attempt 3 001424.723: hdmi: HDMI:EDID error reading EDID block 0 attempt 4 001426.026: hdmi: HDMI:EDID error reading EDID block 0 attempt 5 001427.329: hdmi: HDMI:EDID error reading EDID block 0 attempt 6 001428.632: hdmi: HDMI:EDID error reading EDID block 0 attempt 7 001429.935: hdmi: HDMI:EDID error reading EDID block 0 attempt 8 001431.238: hdmi: HDMI:EDID error reading EDID block 0 attempt 9 001432.304: hdmi: HDMI:EDID giving up on reading EDID block 0 001432.668: hdmi: HDMI:EDID error reading EDID block 0 attempt 0 001433.968: hdmi: HDMI:EDID error reading EDID block 0 attempt 1 001435.267: hdmi: HDMI:EDID error reading EDID block 0 attempt 2 001436.566: hdmi: HDMI:EDID error reading EDID block 0 attempt 3 001437.865: hdmi: HDMI:EDID error reading EDID block 0 attempt 4 001439.164: hdmi: HDMI:EDID error reading EDID block 0 attempt 5 001440.463: hdmi: HDMI:EDID error reading EDID block 0 attempt 6 001441.764: hdmi: HDMI:EDID error reading EDID block 0 attempt 7 001443.063: hdmi: HDMI:EDID error reading EDID block 0 attempt 8 001444.362: hdmi: HDMI:EDID error reading EDID block 0 attempt 9 001445.424: hdmi: HDMI:EDID giving up on reading EDID block 0 001445.506: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 001445.578: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 001450.522: brfs: File read: /mfs/sd/cmdline.txt 001450.619: Read command line from file 'cmdline.txt': 001450.682: 'dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=643d83d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait' 001450.996: brfs: File read: 142 bytes 001804.740: brfs: File read: /mfs/sd/kernel7.img 001804.801: Loading 'kernel7.img' to 0x8000 size 0x510950 001809.197: No kernel trailer - assuming DT-capable 001809.276: Trying Device Tree file 'bcm2710-rpi-3-b-plus.dtb' 001809.338: brfs: File read: 5310800 bytes 001812.925: brfs: File read: /mfs/sd/bcm2710-rpi-3-b-plus.dtb 001812.987: Loading 'bcm2710-rpi-3-b-plus.dtb' to 0x518950 size 0x69ca 001831.873: dtdebug: delete_node(/__local_fixups__) 001842.390: dtdebug: /aliases:i2c_vc=i2c0 001852.906: dtdebug: /__symbols__:i2c_vc=i2c0 001860.808: dtdebug: /__overrides__:i2c_vc=i2c0 001875.947: dtdebug: /__overrides__:i2c_vc_baudrate=i2c0_baudrate 001880.728: dtdebug: /aliases:i2c=i2c1 001891.416: dtdebug: /__symbols__:i2c=i2c1 001899.434: dtdebug: /__overrides__:i2c=i2c1 001904.235: dtdebug: /aliases:i2c_arm=i2c1 001914.985: dtdebug: /__symbols__:i2c_arm=i2c1 001923.021: dtdebug: /__overrides__:i2c_arm=i2c1 001938.348: dtdebug: /__overrides__:i2c_baudrate=i2c1_baudrate 001953.716: dtdebug: /__overrides__:i2c_arm_baudrate=i2c1_baudrate 001961.088: dtparam: uart0_clkrate=48000000 001966.791: dtdebug: /__overrides__ has no uart0_clkrate property 001966.806: Unknown dtparam 'uart0_clkrate' - ignored 001966.866: brfs: File read: 27082 bytes 001972.500: brfs: File read: /mfs/sd/config.txt 001972.648: brfs: File read: 1625 bytes 001974.085: brfs: File read: /mfs/sd/extraconfig.txt 001974.728: dtparam: audio=on 001980.213: dtdebug: Found override audio 001980.248: dtdebug: override audio: string target 'status' 002012.082: dtparam: uart1=off 002017.472: dtdebug: Found override uart1 002017.506: dtdebug: override uart1: string target 'status' 003860.721: dtparam: cam0-pwdn-ctrl=49 003866.128: dtdebug: Found override cam0-pwdn-ctrl 003866.151: dtparam: cam0-pwdn=5 003871.537: dtdebug: Found override cam0-pwdn 003883.596: dtparam: cam0-led-ctrl=49 003888.998: dtdebug: Found override cam0-led-ctrl 003889.020: dtparam: cam0-led=6 003894.502: dtdebug: Found override cam0-led 003894.525: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined 003894.609: dtparam: arm_freq=1400000000 003900.043: dtdebug: Found override arm_freq 003900.094: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) 003916.119: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) 003932.213: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) 003948.410: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) 003964.725: dtparam: core_freq=400000000 003970.489: dtdebug: /__overrides__ has no core_freq property 003970.503: Unknown dtparam 'core_freq' - ignored 003983.489: dtdebug: delete_node(/hat) 003997.872: Device tree loaded to 0x2eff9200 (size 0x6df5) 004000.090: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined 005390.799: vchiq_core: vchiq_init_state: slot_zero = 0xfad80000, is_master = 1 008664.955: brfs: File read: 11 bytes dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=643d83d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939088K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23472K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 630 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 822 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26394 entries in 78 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000023] Switching to timer-based delay loop, resolution 52ns [ 0.000290] Console: colour dummy device 80x30 [ 0.000914] console [tty1] enabled [ 0.000971] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001016] pid_max: default: 32768 minimum: 301 [ 0.001373] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001410] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002347] CPU: Testing write buffer coherency: ok [ 0.002831] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003498] Setting up static identity map for 0x100000 - 0x10003c [ 0.003665] rcu: Hierarchical SRCU implementation. [ 0.004478] smp: Bringing up secondary CPUs ... [ 0.005343] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006271] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007135] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.007256] smp: Brought up 1 node, 4 CPUs [ 0.007338] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.007362] CPU: All CPU(s) started in HYP mode. [ 0.007382] CPU: Virtualization extensions available. [ 0.008374] devtmpfs: initialized [ 0.021397] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.021673] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021721] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.022328] pinctrl core: initialized pinctrl subsystem [ 0.023203] NET: Registered protocol family 16 [ 0.026149] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.031846] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.031882] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.032103] Serial: AMBA PL011 UART driver [ 0.034420] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.069300] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.071236] SCSI subsystem initialized [ 0.071481] usbcore: registered new interface driver usbfs [ 0.071564] usbcore: registered new interface driver hub [ 0.071677] usbcore: registered new device driver usb [ 0.090306] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start [ 0.100133] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3 [ 0.111759] clocksource: Switched to clocksource arch_sys_counter [ 0.200928] VFS: Disk quotas dquot_6.6.0 [ 0.201037] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.201216] FS-Cache: Loaded [ 0.201442] CacheFiles: Loaded [ 0.211470] NET: Registered protocol family 2 [ 0.212294] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.212358] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.212489] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.212693] TCP: Hash tables configured (established 8192 bind 8192) [ 0.212852] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.212918] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.213246] NET: Registered protocol family 1 [ 0.213815] RPC: Registered named UNIX socket transport module. [ 0.213842] RPC: Registered udp transport module. [ 0.213865] RPC: Registered tcp transport module. [ 0.213886] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.215595] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.218625] Initialise system trusted keyrings [ 0.218838] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.228827] FS-Cache: Netfs 'nfs' registered for caching [ 0.229428] NFS: Registering the id_resolver key type [ 0.229475] Key type id_resolver registered [ 0.229497] Key type id_legacy registered [ 0.229528] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.231862] Key type asymmetric registered [ 0.231893] Asymmetric key parser 'x509' registered [ 0.231962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.232144] io scheduler noop registered [ 0.232168] io scheduler deadline registered (default) [ 0.232363] io scheduler cfq registered [ 0.232387] io scheduler mq-deadline registered (default) [ 0.232411] io scheduler kyber registered [ 0.234605] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.244107] Console: switching to colour frame buffer device 82x26 [ 0.250926] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.257650] bcm2835-rng 3f104000.rng: hwrng registered [ 0.260326] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.265649] vc-sm: Videocore shared memory driver [ 0.268399] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.284283] brd: module loaded [ 0.296960] loop: module loaded [ 0.300001] Loading iSCSI transport class v2.0-870. [ 0.303186] libphy: Fixed MDIO Bus: probed [ 0.305695] usbcore: registered new interface driver lan78xx [ 0.308156] usbcore: registered new interface driver smsc95xx [ 0.310511] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.340797] dwc_otg 3f980000.usb: base=(ptrval) [ 0.543456] Core Release: 2.80a [ 0.545838] Setting default values for core params [ 0.548283] Finished setting default values for core params [ 0.751017] Using Buffer DMA mode [ 0.753425] Periodic Transfer Interrupt Enhancement - disabled [ 0.755852] Multiprocessor Interrupt Enhancement - disabled [ 0.758225] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.760571] Dedicated Tx FIFOs mode [ 0.763305] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024 [ 0.767886] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.778818] dwc_otg: Microframe scheduler enabled [ 0.778878] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.781107] WARN::hcd_init_fiq:458: FIQ ASM at 80654f4c length 36 [ 0.783323] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 0.785585] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.787850] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.790174] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.792503] Init: Port Power? op_state=1 [ 0.794746] Init: Power Port (0) [ 0.797161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.801670] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.804105] usb usb1: Product: DWC OTG Controller [ 0.806476] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd [ 0.808897] usb usb1: SerialNumber: 3f980000.usb [ 0.811873] hub 1-0:1.0: USB hub found [ 0.814155] hub 1-0:1.0: 1 port detected [ 0.816902] dwc_otg: FIQ enabled [ 0.816908] dwc_otg: NAK holdoff enabled [ 0.816913] dwc_otg: FIQ split-transaction FSM enabled [ 0.816924] Module dwc_common_port init [ 0.817196] usbcore: registered new interface driver usb-storage [ 0.819656] mousedev: PS/2 mouse device common for all mice [ 0.822825] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.825450] bcm2835-cpufreq: min=600000 max=1400000 [ 0.828267] sdhci: Secure Digital Host Controller Interface driver [ 0.830676] sdhci: Copyright(c) Pierre Ossman [ 0.833473] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.836376] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.839049] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.843173] ledtrig-cpu: registered to indicate activity on CPUs [ 0.845902] hidraw: raw HID events driver (C) Jiri Kosina [ 0.848668] usbcore: registered new interface driver usbhid [ 0.851296] usbhid: USB HID core driver [ 0.854633] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.858753] [vc_sm_connected_init]: start [ 0.867493] [vc_sm_connected_init]: end - returning 0 [ 0.871035] Initializing XFRM netlink socket [ 0.873490] NET: Registered protocol family 17 [ 0.875998] Key type dns_resolver registered [ 0.878834] Registering SWP/SWPB emulation handler [ 0.881974] registered taskstats version 1 [ 0.884377] Loading compiled-in X.509 certificates [ 0.894019] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.896546] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.903344] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.905878] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.934497] sdhost: log_buf @ (ptrval) (fad13000) [ 0.972931] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.976894] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.980748] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.982984] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.986456] of_cfs_init [ 0.988699] of_cfs_init: OK [ 0.991306] Waiting for root device PARTUUID=643d83d6-02... [ 1.007554] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.031882] Indeed it is in host mode hprt0 = 00021501 [ 1.102666] random: fast init done [ 1.131604] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.139589] mmc0: new high speed SDHC card at address aaaa [ 1.144670] mmcblk0: mmc0:aaaa SL32G 29.7 GiB [ 1.148594] mmc1: new high speed SDIO card at address 0001 [ 1.153634] mmcblk0: p1 p2 [ 1.187371] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.191937] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.205915] devtmpfs: mounted [ 1.213606] Freeing unused kernel memory: 1024K [ 1.241802] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.244694] Run /sbin/init as init process [ 1.244785] Indeed it is in host mode hprt0 = 00001101 [ 1.482099] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.487478] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.491002] hub 1-1:1.0: USB hub found [ 1.493963] hub 1-1:1.0: 4 ports detected [ 1.702413] systemd[1]: System time before build time, advancing clock. [ 1.811816] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.841557] NET: Registered protocol family 10 [ 1.845646] Segment Routing with IPv6 [ 1.880348] random: systemd: uninitialized urandom read (16 bytes read) [ 1.885749] random: systemd: uninitialized urandom read (16 bytes read) [ 1.894580] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.903461] systemd[1]: Detected architecture arm. [ 1.929761] systemd[1]: Set hostname to <gvpn>. [ 1.942128] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.947389] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.950587] hub 1-1.1:1.0: USB hub found [ 1.953329] hub 1-1.1:1.0: 3 ports detected [ 2.001169] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read) [ 2.308977] dwc_otg_handle_wakeup_detected_intr lxstate = 2 [ 2.465998] systemd[1]: Listening on udev Kernel Socket. [ 2.472305] systemd[1]: Reached target Swap. [ 2.478955] systemd[1]: Created slice User and Session Slice. [ 2.485267] systemd[1]: Listening on udev Control Socket. [ 2.491226] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.498097] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.507548] systemd[1]: Listening on Syslog Socket. [ 2.821819] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg [ 2.952342] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 2.952360] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.216912] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 3.217860] libphy: lan78xx-mdiobus: probed [ 3.229589] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 3.328122] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.499774] systemd-journald[114]: Received request to flush runtime journal from PID 1 [ 3.889070] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.894438] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.894455] [vc_sm_connected_init]: start [ 3.899447] [vc_sm_connected_init]: installed successfully [ 3.914928] media: Linux media interface: v0.10 [ 4.009064] videodev: Linux video capture interface: v2.00 [ 4.093926] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.095617] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.108957] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.114091] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.128508] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.128528] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.144125] bcm2835_audio soc:audio: card created with 8 channels [ 4.144274] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.144284] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.154318] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.154332] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.190117] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.261391] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.343636] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.374526] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.374957] usbcore: registered new interface driver brcmfmac [ 4.587624] random: crng init done [ 4.587639] random: 7 urandom warning(s) missed due to ratelimiting [ 4.603526] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.650221] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 5.484005] tun: Universal TUN/TAP device driver, 1.6 [ 5.743103] uart-pl011 3f201000.serial: no DMA platform data [ 6.154113] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 6.165255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.166076] brcmfmac: power management disabled [ 6.415864] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.183256] Bluetooth: Core ver 2.22 [ 12.183351] NET: Registered protocol family 31 [ 12.183358] Bluetooth: HCI device and connection manager initialized [ 12.183379] Bluetooth: HCI socket layer initialized [ 12.183393] Bluetooth: L2CAP socket layer initialized [ 12.183434] Bluetooth: SCO socket layer initialized [ 12.202773] Bluetooth: HCI UART driver ver 2.3 [ 12.202787] Bluetooth: HCI UART protocol H4 registered [ 12.202918] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 12.203152] Bluetooth: HCI UART protocol Broadcom registered [ 12.408452] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.408460] Bluetooth: BNEP filters: protocol multicast [ 12.408474] Bluetooth: BNEP socket layer initialized [ 12.559220] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready **Additional context** The issue has been mentioned some time ago for Alpine Linux (look for keyword "Update 3"): https://www.raspberrypi.org/forums/viewtopic.php?f=56&t=60569&p=765924&hilit=gpu_mem+config.txt+include#p764210