Could not connect to Wi-Fi

Marky · 2 July 2015 18:02

Unfortunately, I rebooted the system untill you asked to post logs
Manual connecting is not working this time

connmanctl> agent on
Agent registered
connmanctl> connect wifi_0013efc5093b_4d61726b79_managed_psk
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed

Last logs: http://paste.osmc.io/ezehitujut

Marky · 2 July 2015 18:16

kodi.old.log found on CD Card: http://paste.osmc.io/eyocoladeb.vhdl

HarryL · 3 July 2015 07:12

What wifi channel is your AP/wifi work at, is it set to automatic? or a fixed channel?..

some of the higher channels have trouble with microwave ovens and other thing like a refrigerator, close to ,bad antenna cable/TV… check to see if your AP/wifi is on automatic channel.

Marky · 3 July 2015 07:53

The channels on my router are set to automatic

DBMandrake · 3 July 2015 07:58

Which is generally not a good idea, as routers can be very poor at picking a channel to use. In theory they should scan for other AP’s and try to avoid those channels but more often than not this is not the case. Also a bunch of nearby routers all set to auto can end up with them playing musical chairs because each is looking for a channel that others are not using - so you end up on a different channel each time you turn on your router.

I would install a wifi scanner such as inSSIDer on a laptop and scan to see what channels are being used by neighbours, and try manually picking channel 1, 6 or 11 based on which ones have the least stations and/or weakest signals from neighbours…

You also haven’t mentioned how far the Pi is from the router ?

Marky · 3 July 2015 08:03

My router is 2 metres far from the router, and it has a good signal.

I will try to change the channel and tell you if it connected in a couple of minutes

Marky · 3 July 2015 08:05

As you can see, there is no networks on 10th channel, I will set it static, or set 11?

HarryL · 3 July 2015 08:14

i would set it on a low channel, like 2.

Marky · 3 July 2015 08:20

marky@Marky-UB:~$ ssh ‘osmc@192.168.1.101’
ssh: connect to host 192.168.1.101 port 22: Network is unreachable
marky@Marky-UB:~$ ssh ‘osmc@192.168.1.101’
The authenticity of host ‘192.168.1.101 (192.168.1.101)’ can’t be established.
ECDSA key fingerprint is 3c:5e:3c:81:0c:83:d7:f1:5d:a2:cf:d6:46:2b:97:71.
Are you sure you want to continue connecting (yes/no)? y
Please type ‘yes’ or ‘no’: yes
Warning: Permanently added ‘192.168.1.101’ (ECDSA) to the list of known hosts.
OSMC: Open Source Media Center

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Jul 2 17:58:13 2015 from 192.168.1.104
osmc@osmc:~$ sudo shutdown -r now
Connection to 192.168.1.101 closed by remote host.
Connection to 192.168.1.101 closed.
marky@Marky-UB:~$ ssh ‘osmc@192.168.1.101’
OSMC: Open Source Media Center

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jul 3 08:16:49 2015 from 192.168.1.104
osmc@osmc:~$ connmanctl
connmanctl> enable wifi
Error wifi: Already enabled
connmanctl> scan wifi
Scan completed for wifi
connmanctl> services
*AO Wired ethernet_b827eb570082_cable
*A Marky wifi_0013efc5093b_4d61726b79_managed_psk
Sherwood wifi_0013efc5093b_53686572776f6f64_managed_psk
Sasha wifi_0013efc5093b_5361736861_managed_psk
Vika wifi_0013efc5093b_56696b61_managed_psk
connmanctl> agent on
Agent registered
connmanctl> connect wifi_0013efc5093b_4d61726b79_managed_psk
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? y
Agent ReportError wifi_0013efc5093b_4d61726b79_managed_psk
connect-failed
connmanctl> Retry (yes/no)? n
Error /net/connman/service/wifi_0013efc5093b_4d61726b79_managed_psk: Input/output error

Set the 2nd channel, but nothing changed. Logs: http://paste.osmc.io/ubigewozag

DBMandrake · 4 July 2015 10:53

Sorry but I don’t have any other ideas or suggestions for you at this time - other than to try a different model of wireless adaptor as a test. It may be that there is an issue with the driver that supports that wireless adaptor.

Without trying a completely different adaptor (which uses a different driver) it’s not really possible to know whether it’s a driver bug or an environmental factor such as the configuration of your network, interference and so on.

Marky · 4 July 2015 11:07

Maybe there is a problem?
How can I install this pack of drivers?

Marky · 5 July 2015 18:37

@oliver1 @DBMandrake @HarryL

So, guys, an ideas?
Maybe drivers can fix this problem?

sam_nazarko · 5 July 2015 22:21

apt-get update
apt-get install usbutils

then post output of

dmesg
lsusb

oliver1 · 6 July 2015 07:09

Hi!
I installed usbutils as sam said, then I did the connmanctl commands asked by @DBMandrake and got this

osmc@osmc2:~$ sudo connmanctl
connmanctl> enable wifi
Error wifi: Already enabled
connmanctl> scan wifi
Scan completed for wifi
connmanctl> services
*AO Wired                ethernet_b827eb8edafd_cable
    Cortex3              wifi_000f55a8d901_436f7274657833_managed_psk
    MIGROS WiFi          wifi_000f55a8d901_4d4947524f532057694669_managed_none
    MIGROS_EAP           wifi_000f55a8d901_4d4947524f535f454150_managed_ieee8021x
connmanctl> agent on
Agent registered
connmanctl> connect wifi_000f55a8d901_436f7274657833_managed_psk
Agent RequestInput wifi_000f55a8d901_436f7274657833_managed_psk
  Passphrase = [ Type=psk, Requirement=mandatory ]
Passphrase? XXXXXXXXXXXX
Agent ReportError wifi_000f55a8d901_436f7274657833_managed_psk
  connect-failed
connmanctl> Retry (yes/no)? yes
Agent ReportError wifi_000f55a8d901_436f7274657833_managed_psk
  connect-failed
connmanctl> Retry (yes/no)? yes
Agent ReportError wifi_000f55a8d901_436f7274657833_managed_psk
  connect-failed
connmanctl> Retry (yes/no)? yes
Agent ReportError wifi_000f55a8d901_436f7274657833_managed_psk
  connect-failed
connmanctl> Retry (yes/no)? yes
Agent ReportError wifi_000f55a8d901_436f7274657833_managed_psk
  connect-failed
connmanctl> Retry (yes/no)? yes
Agent ReportError wifi_000f55a8d901_436f7274657833_managed_psk
  connect-failed
connmanctl> Retry (yes/no)? yes
Agent ReportError wifi_000f55a8d901_436f7274657833_managed_psk
  connect-failed
connmanctl> Retry (yes/no)? no
Error /net/connman/service/wifi_000f55a8d901_436f7274657833_managed_psk: Input/output error
connmanctl> services
*AO Wired                ethernet_b827eb8edafd_cable
    Cortex3              wifi_000f55a8d901_436f7274657833_managed_psk
    MIGROS WiFi          wifi_000f55a8d901_4d4947524f532057694669_managed_none
    MIGROS_EAP           wifi_000f55a8d901_4d4947524f535f454150_managed_ieee8021x
    ems-07524            wifi_000f55a8d901_656d732d3037353234_managed_psk
    visitor-50861        wifi_000f55a8d901_76697369746f722d3530383631_managed_psk

After that, for the dmesg and lsusb as @sam_nazarko requested I got the following :

osmc@osmc2:~$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.13-1-osmc (root@vero) (gcc version 4.9.2 (Raspbian 4.9.2-10) ) #1 PREEMPT Sun May 17 15:58:48 UTC 2015
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi Model B Rev 2
[ 0.000000] cma: Reserved 8 MiB at 0x16800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 94208
[ 0.000000] free_area_init_node: node 0, pgdat c0992c6c, node_mem_map d6514000
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 94208 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 93472
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708.boardrev=0xf bcm2708.serial=0x5e8edafd smsc95xx.macaddr=B8:27:EB:8E:DA:FD bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet osmcdev=rbp1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 354632K/376832K available (7289K kernel code, 356K rwdata, 1828K rodata, 328K init, 726K bss, 22200K reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xd7800000 - 0xff000000 ( 632 MB)
lowmem : 0xc0000000 - 0xd7000000 ( 368 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc08ef7b0 (9118 kB)
.init : 0xc08f0000 - 0xc0942000 ( 328 kB)
.data : 0xc0942000 - 0xc099b26c ( 357 kB)
.bss : 0xc099b26c - 0xc0a50b28 ( 727 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:522
[ 0.000024] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
[ 0.000072] Switching to timer-based delay loop, resolution 1000ns
[ 0.000344] Console: colour dummy device 80x30
[ 0.000547] console [tty0] enabled
[ 0.000571] Calibrating delay loop (skipped), value calculated using timer frequency… 2.00 BogoMIPS (lpj=10000)
[ 0.000597] pid_max: default: 32768 minimum: 301
[ 0.000941] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000966] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001915] Initializing cgroup subsys memory
[ 0.001967] Initializing cgroup subsys devices
[ 0.001995] Initializing cgroup subsys freezer
[ 0.002020] Initializing cgroup subsys net_cls
[ 0.002041] Initializing cgroup subsys blkio
[ 0.002125] CPU: Testing write buffer coherency: ok
[ 0.002200] ftrace: allocating 17808 entries in 53 pages
[ 0.094616] Setting up static identity map for 0x6baa48 - 0x6baaa4
[ 0.097320] devtmpfs: initialized
[ 0.113678] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.116887] pinctrl core: initialized pinctrl subsystem
[ 0.119551] NET: Registered protocol family 16
[ 0.124731] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.154402] cpuidle: using governor ladder
[ 0.184455] cpuidle: using governor menu
[ 0.184656] bcm2708.uart_clock = 3000000
[ 0.188276] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.188304] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.188342] mailbox: Broadcom VideoCore Mailbox driver
[ 0.188499] bcm2708_vcio: mailbox at f200b880
[ 0.188908] bcm_power: Broadcom power driver
[ 0.188933] bcm_power_open() → 0
[ 0.188945] bcm_power_request(0, 8)
[ 0.689635] bcm_mailbox_read → 00000080, 0
[ 0.689654] bcm_power_request → 0
[ 0.689813] Serial: AMBA PL011 UART driver
[ 0.690016] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 0.757713] SCSI subsystem initialized
[ 0.758013] usbcore: registered new interface driver usbfs
[ 0.758137] usbcore: registered new interface driver hub
[ 0.758306] usbcore: registered new device driver usb
[ 0.760079] Switched to clocksource stc
[ 0.786941] FS-Cache: Loaded
[ 0.787316] CacheFiles: Loaded
[ 0.802810] NET: Registered protocol family 2
[ 0.804184] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.804287] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.804387] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.804473] TCP: reno registered
[ 0.804501] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.804535] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.804850] NET: Registered protocol family 1
[ 0.805486] RPC: Registered named UNIX socket transport module.
[ 0.805517] RPC: Registered udp transport module.
[ 0.805528] RPC: Registered tcp transport module.
[ 0.805538] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.806056] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[ 0.806321] bcm2708_dma: DMA manager at f2007000
[ 0.806506] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.808069] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.808204] audit: initializing netlink subsys (disabled)
[ 0.808302] audit: type=2000 audit(0.740:1): initialized
[ 0.823540] VFS: Disk quotas dquot_6.5.2
[ 0.823930] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.826684] FS-Cache: Netfs ‘nfs’ registered for caching
[ 0.828416] NFS: Registering the id_resolver key type
[ 0.828510] Key type id_resolver registered
[ 0.828528] Key type id_legacy registered
[ 0.829791] msgmni has been set to 708
[ 0.833037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.833418] io scheduler noop registered
[ 0.834044] io scheduler bfq registered (default)
[ 0.834062] BFQ I/O-scheduler version: v7r7
[ 0.836416] BCM2708FB: allocated DMA memory 56c00000
[ 0.836487] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.842440] Console: switching to colour frame buffer device 90x30
[ 0.847283] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[ 0.847709] uart-pl011 dev:f1: no DMA platform data
[ 0.848436] vc-cma: Videocore CMA driver
[ 0.848460] vc-cma: vc_cma_base = 0x00000000
[ 0.848473] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.848484] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.861454] brd: module loaded
[ 0.868213] loop: module loaded
[ 0.869130] vchiq: vchiq_init_state: slot_zero = 0xd6c80000, is_master = 0
[ 0.870484] Loading iSCSI transport class v2.0-870.
[ 0.871891] usbcore: registered new interface driver smsc95xx
[ 0.872012] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.072392] Core Release: 2.80a
[ 1.072429] Setting default values for core params
[ 1.072457] Finished setting default values for core params
[ 1.272624] Using Buffer DMA mode
[ 1.272651] Periodic Transfer Interrupt Enhancement - disabled
[ 1.272664] Multiprocessor Interrupt Enhancement - disabled
[ 1.272677] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.272692] Dedicated Tx FIFOs mode
[ 1.273119] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xd6c14000 dma = 0x56c14000 len=9024
[ 1.273157] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[ 1.273187] dwc_otg: Microframe scheduler enabled
[ 1.273257] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc04fd81c
[ 1.273276] WARN::hcd_init_fiq:413: FIQ ASM at 0xc04fdaf8 length 36
[ 1.273307] WARN::hcd_init_fiq:438: MPHI regs_base at 0xd7806000
[ 1.273341] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.273401] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.273465] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.273506] Init: Port Power? op_state=1
[ 1.273517] Init: Power Port (0)
[ 1.273876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.273903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.273920] usb usb1: Product: DWC OTG Controller
[ 1.273936] usb usb1: Manufacturer: Linux 3.18.13-1-osmc dwc_otg_hcd
[ 1.273951] usb usb1: SerialNumber: bcm2708_usb
[ 1.275062] hub 1-0:1.0: USB hub found
[ 1.275164] hub 1-0:1.0: 1 port detected
[ 1.275778] dwc_otg: FIQ enabled
[ 1.275799] dwc_otg: NAK holdoff enabled
[ 1.275811] dwc_otg: FIQ split-transaction FSM enabled
[ 1.275869] Module dwc_common_port init
[ 1.276396] usbcore: registered new interface driver usb-storage
[ 1.276840] mousedev: PS/2 mouse device common for all mice
[ 1.278114] bcm2835-cpufreq: min=700000 max=850000
[ 1.278473] sdhci: Secure Digital Host Controller Interface driver
[ 1.278493] sdhci: Copyright(c) Pierre Ossman
[ 1.278747] DMA channels allocated for the MMC driver
[ 1.310141] Load BCM2835 MMC driver
[ 1.310491] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.311049] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.311237] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.311556] usbcore: registered new interface driver usbhid
[ 1.311576] usbhid: USB HID core driver
[ 1.311962] TCP: cubic registered
[ 1.311991] Initializing XFRM netlink socket
[ 1.312044] NET: Registered protocol family 17
[ 1.312257] Key type dns_resolver registered
[ 1.313547] registered taskstats version 1
[ 1.313847] vc-sm: Videocore shared memory driver
[ 1.313875] [vc_sm_connected_init]: start
[ 1.319329] [vc_sm_connected_init]: end - returning 0
[ 1.324017] Waiting for root device /dev/mmcblk0p2…
[ 1.380036] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.383917] mmc0: new high speed SDHC card at address aaaa
[ 1.384718] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 1.386454] mmcblk0: p1 p2
[ 1.444939] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.445039] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.455221] devtmpfs: mounted
[ 1.456417] Freeing unused kernel memory: 328K (c08f0000 - c0942000)
[ 1.470358] Indeed it is in host mode hprt0 = 00021501
[ 1.650369] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.650594] Indeed it is in host mode hprt0 = 00001101
[ 1.860843] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.860898] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.862128] hub 1-1:1.0: USB hub found
[ 1.862295] hub 1-1:1.0: 3 ports detected
[ 2.140363] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.240687] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.240722] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.243930] smsc95xx v1.0.4
[ 2.321795] smsc95xx 1-1.1:1.0 eth0: register ‘smsc95xx’ at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:8e:da:fd
[ 2.400360] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.518274] usb 1-1.2: New USB device found, idVendor=148f, idProduct=5370
[ 2.518313] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.518331] usb 1-1.2: Product: 802.11 n WLAN
[ 2.518346] usb 1-1.2: Manufacturer: Ralink
[ 2.518361] usb 1-1.2: SerialNumber: 1.0
[ 3.336805] random: systemd urandom read with 81 bits of entropy available
[ 3.408511] NET: Registered protocol family 10
[ 4.059374] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.060049] systemd[1]: Found ordering cycle on basic.target/start
[ 4.060397] systemd[1]: Found dependency on sysinit.target/start
[ 4.060469] systemd[1]: Found dependency on kbd.service/start
[ 4.060531] systemd[1]: Found dependency on remote-fs.target/start
[ 4.060580] systemd[1]: Found dependency on remote-fs-pre.target/start
[ 4.060627] systemd[1]: Found dependency on connman.service/start
[ 4.060674] systemd[1]: Found dependency on dbus.service/start
[ 4.060717] systemd[1]: Found dependency on basic.target/start
[ 4.060767] systemd[1]: Breaking ordering cycle by deleting job kbd.service/start
[ 4.060819] systemd[1]: Job kbd.service/start deleted to break ordering cycle starting with basic.target/start
[ 4.061514] systemd[1]: Found ordering cycle on basic.target/start
[ 4.061582] systemd[1]: Found dependency on sysinit.target/start
[ 4.061644] systemd[1]: Found dependency on rpcbind.service/start
[ 4.061702] systemd[1]: Found dependency on network-online.target/start
[ 4.061750] systemd[1]: Found dependency on network.target/start
[ 4.061799] systemd[1]: Found dependency on connman.service/start
[ 4.061845] systemd[1]: Found dependency on dbus.service/start
[ 4.061892] systemd[1]: Found dependency on basic.target/start
[ 4.061938] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[ 4.061989] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[ 4.214758] fuse init (API version 7.23)
[ 4.640310] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.720581] systemd-udevd[110]: starting version 215
[ 6.335924] lirc_dev: IR Remote Control driver registered, major 246
[ 6.357364] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.653418] snd-hifiberry-dac sound: pcm5102a-hifi ↔ 20203000.i2s mapping ok
[ 7.057775] cfg80211: Calling CRDA to update world regulatory domain
[ 7.330275] lirc_rpi: auto-detected active high receiver on GPIO pin 18
[ 7.330900] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
[ 7.330925] lirc_rpi: driver registered!
[ 7.334051] random: nonblocking pool is initialized
[ 7.647685] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.780454] usb 1-1.2: reset high-speed USB device number 4 using dwc_otg
[ 7.940954] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 8.420472] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 8.499541] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’
[ 8.520456] usbcore: registered new interface driver rt2800usb
[ 10.245117] input: lircd as /devices/virtual/input/input0
[ 11.336681] smsc95xx 1-1.1:1.0 eth0: hardware isn’t capable of remote wakeup
[ 11.338893] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.499173] systemd-journald[83]: Received request to flush runtime journal from PID 1
[ 12.900806] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 12.933464] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.270644] 8021q: 802.1Q VLAN Support v1.8
[ 13.598879] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file ‘rt2870.bin’
[ 13.613259] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 13.997726] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.551295] Console: switching to colour dummy device 80x30
[ 161.559045] wlan0: authenticate with 20:0b:c7:69:27:bc
[ 161.598195] wlan0: send auth to 20:0b:c7:69:27:bc (try 1/3)
[ 161.611288] wlan0: authenticated
[ 161.621585] wlan0: associate with 20:0b:c7:69:27:bc (try 1/3)
[ 161.730181] wlan0: associate with 20:0b:c7:69:27:bc (try 2/3)
[ 161.840140] wlan0: associate with 20:0b:c7:69:27:bc (try 3/3)
[ 161.950172] wlan0: association with 20:0b:c7:69:27:bc timed out
[ 170.772179] wlan0: authenticate with 20:0b:c7:69:27:bc
[ 170.806513] wlan0: send auth to 20:0b:c7:69:27:bc (try 1/3)
[ 170.920190] wlan0: send auth to 20:0b:c7:69:27:bc (try 2/3)
[ 170.921846] wlan0: authenticated
[ 170.930225] wlan0: associate with 20:0b:c7:69:27:bc (try 1/3)
[ 171.040186] wlan0: associate with 20:0b:c7:69:27:bc (try 2/3)
[ 171.150137] wlan0: associate with 20:0b:c7:69:27:bc (try 3/3)
[ 171.260138] wlan0: association with 20:0b:c7:69:27:bc timed out
[ 180.036780] wlan0: authenticate with 20:0b:c7:69:27:bc
[ 180.067619] wlan0: send auth to 20:0b:c7:69:27:bc (try 1/3)
[ 180.070930] wlan0: authenticated
[ 180.080227] wlan0: associate with 20:0b:c7:69:27:bc (try 1/3)
[ 180.190170] wlan0: associate with 20:0b:c7:69:27:bc (try 2/3)
[ 180.300228] wlan0: associate with 20:0b:c7:69:27:bc (try 3/3)
[ 180.411029] wlan0: association with 20:0b:c7:69:27:bc timed out
[ 196.414529] wlan0: authenticate with 20:0b:c7:69:27:bc
[ 196.447142] wlan0: send auth to 20:0b:c7:69:27:bc (try 1/3)
[ 196.560206] wlan0: send auth to 20:0b:c7:69:27:bc (try 2/3)
[ 196.561903] wlan0: authenticated
[ 196.570224] wlan0: associate with 20:0b:c7:69:27:bc (try 1/3)
[ 196.594900] wlan0: RX AssocResp from 20:0b:c7:69:27:bc (capab=0x431 status=0 aid=5)
[ 196.604192] wlan0: associated
[ 196.604378] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 196.604663] cfg80211: Calling CRDA to update world regulatory domain
[ 200.658916] wlan0: deauthenticated from 20:0b:c7:69:27:bc (Reason: 2=PREV_AUTH_NOT_VALID)
[ 200.760403] cfg80211: Calling CRDA for country: CH
[ 205.900841] wlan0: authenticate with 20:0b:c7:69:27:bc
[ 205.939291] wlan0: send auth to 20:0b:c7:69:27:bc (try 1/3)
[ 205.941717] wlan0: authenticated
[ 205.950210] wlan0: associate with 20:0b:c7:69:27:bc (try 1/3)
[ 206.060208] wlan0: associate with 20:0b:c7:69:27:bc (try 2/3)
[ 206.170137] wlan0: associate with 20:0b:c7:69:27:bc (try 3/3)
[ 206.290133] wlan0: association with 20:0b:c7:69:27:bc timed out
[ 208.354008] wlan0: authenticate with 20:0b:c7:69:27:bc
[ 208.388654] wlan0: send auth to 20:0b:c7:69:27:bc (try 1/3)
[ 208.391145] wlan0: authenticated
[ 208.400211] wlan0: associate with 20:0b:c7:69:27:bc (try 1/3)
[ 208.510177] wlan0: associate with 20:0b:c7:69:27:bc (try 2/3)
[ 208.620179] wlan0: associate with 20:0b:c7:69:27:bc (try 3/3)
[ 208.730142] wlan0: association with 20:0b:c7:69:27:bc timed out
[ 212.663022] wlan0: authenticate with 20:0b:c7:69:27:bc
[ 212.696551] wlan0: send auth to 20:0b:c7:69:27:bc (try 1/3)
[ 212.700345] wlan0: authenticated
[ 212.710199] wlan0: associate with 20:0b:c7:69:27:bc (try 1/3)
[ 212.820137] wlan0: associate with 20:0b:c7:69:27:bc (try 2/3)
[ 212.930178] wlan0: associate with 20:0b:c7:69:27:bc (try 3/3)
[ 213.040131] wlan0: association with 20:0b:c7:69:27:bc timed out
osmc@osmc2:~$ lsusb
Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. LAN9500 Ethernet 10/100 Adapter / SMSC9512/9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
osmc@osmc2:~$

Thank’s for your help!!

oliver1 · 6 July 2015 14:35

Hi!

I assumed the wifi dongle was not a possible cause because I bought 2 identical piHuts (USB WiFi Adapter for Raspberry Pi | The Pi Hut) and the other was working fine in another pi under Volumio. But then I swapped the wifi dongles and now it works!!!

The dongle that didn’t work on osmc works with Volumio but only at a slow transmission rate (enough for audio). Maybe it didn’t want to connect at such a slow transmission rate.

@Marky I saw here that our wifi dongles are from the same brand (Ralink) and probably the same model (RT5370), which suggests me that the problem lies there… I would try with another dongle, maybe another brand… Did you buy it from ThePiHut?

Lesson learned : stay away from 6$ wifi dongles!

Thank’s again @DBMandrake and @sam_nazarko for all your precious time. On a positive note I learnt a lot about connmanctl

Marky · 6 July 2015 20:57

@sam_nazarko

dmesg:

root@osmc:/home/osmc# dmesg
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.13-1-osmc (root@vero) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Sun May 17 18:50:26 UTC 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] cma: Reserved 8 MiB at 0x2e800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 192512
[    0.000000] free_area_init_node: node 0, pgdat 809abd80, node_mem_map ae213000
[    0.000000]   Normal zone: 1504 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192512 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (8640->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 10 pages/cpu @ae1e1000 s12096 r8192 d20672 u40960
[    0.000000] pcpu-alloc: s12096 r8192 d20672 u40960 alloc=10*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 191008
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0xbf570082 smsc95xx.macaddr=B8:27:EB:57:00:82 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet osmcdev=rbp2
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 744108K/770048K available (7249K kernel code, 401K rwdata, 1864K rodata, 388K init, 763K bss, 25940K reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xaf800000 - 0xff000000   (1272 MB)
    lowmem  : 0x80000000 - 0xaf000000   ( 752 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x808ee928   (9115 kB)
      .init : 0x808ef000 - 0x80950000   ( 388 kB)
      .data : 0x80950000 - 0x809b465c   ( 402 kB)
       .bss : 0x809b465c - 0x80a73594   ( 764 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:608
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[    0.000013] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000035] Switching to timer-based delay loop, resolution 52ns
[    0.000325] Console: colour dummy device 80x30
[    0.000529] console [tty0] enabled
[    0.000555] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000583] pid_max: default: 32768 minimum: 301
[    0.000977] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000998] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002224] Initializing cgroup subsys memory
[    0.002278] Initializing cgroup subsys devices
[    0.002302] Initializing cgroup subsys freezer
[    0.002326] Initializing cgroup subsys net_cls
[    0.002359] Initializing cgroup subsys blkio
[    0.002442] CPU: Testing write buffer coherency: ok
[    0.002519] ftrace: allocating 18151 entries in 54 pages
[    0.046728] CPU0: update cpu_capacity 1024
[    0.046766] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.046785] [bcm2709_smp_prepare_cpus] enter
[    0.046928] Setting up static identity map for 0x6aeea8 - 0x6aef00
[    0.106673] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.106976] CPU1: Booted secondary processor
[    0.106984] [bcm2709_secondary_init] enter cpu:1
[    0.107040] CPU1: update cpu_capacity 1024
[    0.107049] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.126657] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.126909] CPU2: Booted secondary processor
[    0.126916] [bcm2709_secondary_init] enter cpu:2
[    0.126949] CPU2: update cpu_capacity 1024
[    0.126957] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.146688] [bcm2709_boot_secondary] cpu:3 started (0) 18
[    0.146929] CPU3: Booted secondary processor
[    0.146935] [bcm2709_secondary_init] enter cpu:3
[    0.146965] CPU3: update cpu_capacity 1024
[    0.146974] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.147070] Brought up 4 CPUs
[    0.147103] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.147114] CPU: All CPU(s) started in SVC mode.
[    0.148142] devtmpfs: initialized
[    0.173138] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.175168] pinctrl core: initialized pinctrl subsystem
[    0.178248] NET: Registered protocol family 16
[    0.183588] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.206487] cpuidle: using governor ladder
[    0.236513] cpuidle: using governor menu
[    0.236646] bcm2709.uart_clock = 3000000
[    0.239571] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.239592] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.239625] mailbox: Broadcom VideoCore Mailbox driver
[    0.239751] bcm2708_vcio: mailbox at f300b880
[    0.240077] bcm_power: Broadcom power driver
[    0.240095] bcm_power_open() -> 0
[    0.240106] bcm_power_request(0, 8)
[    0.740772] bcm_mailbox_read -> 00000080, 0
[    0.740785] bcm_power_request -> 0
[    0.740905] Serial: AMBA PL011 UART driver
[    0.741043] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    0.809056] SCSI subsystem initialized
[    0.809293] usbcore: registered new interface driver usbfs
[    0.809408] usbcore: registered new interface driver hub
[    0.809549] usbcore: registered new device driver usb
[    0.811190] Switched to clocksource arch_sys_counter
[    0.838702] FS-Cache: Loaded
[    0.839023] CacheFiles: Loaded
[    0.850702] NET: Registered protocol family 2
[    0.852093] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.852236] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.852430] TCP: Hash tables configured (established 8192 bind 8192)
[    0.852540] TCP: reno registered
[    0.852563] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.852627] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.853098] NET: Registered protocol family 1
[    0.853521] RPC: Registered named UNIX socket transport module.
[    0.853537] RPC: Registered udp transport module.
[    0.853547] RPC: Registered tcp transport module.
[    0.853558] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.854019] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.854241] bcm2708_dma: DMA manager at f3007000
[    0.854400] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    0.856027] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.856253] audit: initializing netlink subsys (disabled)
[    0.856317] audit: type=2000 audit(0.829:1): initialized
[    0.872200] VFS: Disk quotas dquot_6.5.2
[    0.872578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.875558] FS-Cache: Netfs 'nfs' registered for caching
[    0.876546] NFS: Registering the id_resolver key type
[    0.876618] Key type id_resolver registered
[    0.876632] Key type id_legacy registered
[    0.877675] msgmni has been set to 1469
[    0.879743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.879928] io scheduler noop registered
[    0.880246] io scheduler bfq registered (default)
[    0.880258] BFQ I/O-scheduler version: v7r7
[    0.882752] BCM2708FB: allocated DMA memory eec00000
[    0.882799] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.916592] Console: switching to colour frame buffer device 240x67
[    0.938789] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[    0.939096] uart-pl011 dev:f1: no DMA platform data
[    0.939595] vc-cma: Videocore CMA driver
[    0.939610] vc-cma: vc_cma_base      = 0x00000000
[    0.939622] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.939633] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.951270] brd: module loaded
[    0.957117] loop: module loaded
[    0.957943] vchiq: vchiq_init_state: slot_zero = 0xaec80000, is_master = 0
[    0.958796] Loading iSCSI transport class v2.0-870.
[    0.959753] usbcore: registered new interface driver smsc95xx
[    0.959829] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.160196] Core Release: 2.80a
[    1.160218] Setting default values for core params
[    1.160245] Finished setting default values for core params
[    1.360655] Using Buffer DMA mode
[    1.360670] Periodic Transfer Interrupt Enhancement - disabled
[    1.360681] Multiprocessor Interrupt Enhancement - disabled
[    1.360692] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.360709] Dedicated Tx FIFOs mode
[    1.361090] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xaec14000 dma = 0xeec14000 len=9024
[    1.361132] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[    1.361157] dwc_otg: Microframe scheduler enabled
[    1.361266] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x804f8c30
[    1.361286] WARN::hcd_init_fiq:413: FIQ ASM at 0x804f8fa0 length 36
[    1.361306] WARN::hcd_init_fiq:438: MPHI regs_base at 0xaf80a000
[    1.361336] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.361389] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.361439] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.361495] Init: Port Power? op_state=1
[    1.361506] Init: Power Port (0)
[    1.361808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.361828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.361844] usb usb1: Product: DWC OTG Controller
[    1.361860] usb usb1: Manufacturer: Linux 3.18.13-1-osmc dwc_otg_hcd
[    1.361875] usb usb1: SerialNumber: bcm2708_usb
[    1.362853] hub 1-0:1.0: USB hub found
[    1.362916] hub 1-0:1.0: 1 port detected
[    1.363431] dwc_otg: FIQ enabled
[    1.363446] dwc_otg: NAK holdoff enabled
[    1.363456] dwc_otg: FIQ split-transaction FSM enabled
[    1.363498] Module dwc_common_port init
[    1.363875] usbcore: registered new interface driver usb-storage
[    1.364166] mousedev: PS/2 mouse device common for all mice
[    1.365076] bcm2835-cpufreq: min=600000 max=900000
[    1.365392] sdhci: Secure Digital Host Controller Interface driver
[    1.365404] sdhci: Copyright(c) Pierre Ossman
[    1.365594] DMA channels allocated for the MMC driver
[    1.401222] Load BCM2835 MMC driver
[    1.401529] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.405424] ledtrig-cpu: registered to indicate activity on CPUs
[    1.407774] hidraw: raw HID events driver (C) Jiri Kosina
[    1.408082] usbcore: registered new interface driver usbhid
[    1.408095] usbhid: USB HID core driver
[    1.409476] TCP: cubic registered
[    1.409497] Initializing XFRM netlink socket
[    1.409549] NET: Registered protocol family 17
[    1.410801] Key type dns_resolver registered
[    1.410980] Registering SWP/SWPB emulation handler
[    1.413379] registered taskstats version 1
[    1.415799] vc-sm: Videocore shared memory driver
[    1.415819] [vc_sm_connected_init]: start
[    1.416690] [vc_sm_connected_init]: end - returning 0
[    1.417716] Waiting for root device /dev/mmcblk0p2...
[    1.439246] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.441464] mmc0: new high speed SD card at address 1234
[    1.442061] mmcblk0: mmc0:1234 SA02G 1.85 GiB 
[    1.443988]  mmcblk0: p1 p2
[    1.536848] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.536919] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.546811] devtmpfs: mounted
[    1.547491] Freeing unused kernel memory: 388K (808ef000 - 80950000)
[    1.561368] Indeed it is in host mode hprt0 = 00021501
[    1.741341] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.741505] Indeed it is in host mode hprt0 = 00001101
[    1.941708] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.941756] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.942851] hub 1-1:1.0: USB hub found
[    1.942990] hub 1-1:1.0: 5 ports detected
[    2.221494] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.321644] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.321675] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.324802] smsc95xx v1.0.4
[    2.385329] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:57:00:82
[    2.461450] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[    2.578970] usb 1-1.4: New USB device found, idVendor=148f, idProduct=5370
[    2.579003] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.579019] usb 1-1.4: Product: 802.11 n WLAN
[    2.579034] usb 1-1.4: Manufacturer: Ralink
[    2.579050] usb 1-1.4: SerialNumber: 1.0
[    2.891567] usb 1-1.2: new low-speed USB device number 5 using dwc_otg
[    3.009730] usb 1-1.2: New USB device found, idVendor=1a2c, idProduct=0e24
[    3.009766] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.009782] usb 1-1.2: Product: USB Keyboard
[    3.009797] usb 1-1.2: Manufacturer: SEM
[    3.023283] input: SEM USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A2C:0E24.0001/input/input0
[    3.023683] hid-generic 0003:1A2C:0E24.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-bcm2708_usb-1.2/input0
[    3.035406] input: SEM USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1A2C:0E24.0002/input/input1
[    3.035809] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-bcm2708_usb-1.2/input1
[    3.684047] random: systemd urandom read with 84 bits of entropy available
[    3.749529] NET: Registered protocol family 10
[    4.188297] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    4.188602] systemd[1]: Found ordering cycle on basic.target/start
[    4.188632] systemd[1]: Found dependency on sysinit.target/start
[    4.188660] systemd[1]: Found dependency on rpcbind.service/start
[    4.188688] systemd[1]: Found dependency on network-online.target/start
[    4.188713] systemd[1]: Found dependency on connman-wait-for-network.service/start
[    4.188738] systemd[1]: Found dependency on basic.target/start
[    4.188764] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[    4.188795] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[    4.189133] systemd[1]: Found ordering cycle on basic.target/start
[    4.189165] systemd[1]: Found dependency on sysinit.target/start
[    4.189193] systemd[1]: Found dependency on kbd.service/start
[    4.189220] systemd[1]: Found dependency on remote-fs.target/start
[    4.189244] systemd[1]: Found dependency on remote-fs-pre.target/start
[    4.189269] systemd[1]: Found dependency on connman.service/start
[    4.189293] systemd[1]: Found dependency on basic.target/start
[    4.189318] systemd[1]: Breaking ordering cycle by deleting job kbd.service/start
[    4.189347] systemd[1]: Job kbd.service/start deleted to break ordering cycle starting with basic.target/start
[    4.366766] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.389809] fuse init (API version 7.23)
[    4.756201] systemd-udevd[130]: starting version 215
[    5.104804] lirc_dev: IR Remote Control driver registered, major 246 
[    5.241803] cfg80211: Calling CRDA to update world regulatory domain
[    5.304361] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
[    5.330368] random: nonblocking pool is initialized
[    5.541378] usb 1-1.4: reset high-speed USB device number 4 using dwc_otg
[    5.605094] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.652499] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[    5.678291] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[    5.705799] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.708499] usbcore: registered new interface driver rt2800usb
[    6.261279] lirc_rpi: auto-detected active high receiver on GPIO pin 18
[    6.261686] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
[    6.261706] lirc_rpi: driver registered!
[    6.527366] input: lircd as /devices/virtual/input/input2
[    6.820115] systemd-journald[99]: Received request to flush runtime journal from PID 1
[    7.768010] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    7.769202] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.926204] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[    7.971673] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[    8.246471] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.211712] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.213043] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[   12.832307] 8021q: 802.1Q VLAN Support v1.8
[   14.221451] wlan0: authenticate with f4:ec:38:fc:6f:26
[   14.267545] wlan0: send auth to f4:ec:38:fc:6f:26 (try 1/3)
[   14.269115] wlan0: authenticated
[   14.271249] wlan0: associate with f4:ec:38:fc:6f:26 (try 1/3)
[   14.275146] wlan0: RX AssocResp from f4:ec:38:fc:6f:26 (capab=0x431 status=0 aid=6)
[   14.281825] wlan0: associated
[   14.282034] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   17.593517] Console: switching to colour dummy device 80x30

lsusb

root@osmc:/home/osmc# lsusb
Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 005: ID 1a2c:0e24 China Resource Semico Co., Ltd 
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Marky · 6 July 2015 20:59

@oliver1
Yes, I’ve got the same dongle(RT5370), but it was bought on Aliexpress for 3$

Unfortunately, I have no other dongles to try

Dmitry_Trus · 18 April 2017 07:00

Thank you, your advice saved me a ton of time! By strange reason my Raspberry Pi box started to fail when attempting to connect to any WiFi hotspot, telling that something happened and I should have a look into the logs connmanctl allowed to connect to a needed one and remembered the connection settings.

Thanks a lot!!

Tom_Doyle · 27 July 2018 19:38

A post was split to a new topic: OSMC with Noobs, no wifi