Dolby TrueHD problem

Ainsley · 3 September 2019 16:20

And make sure you set your audio settings according to this:

Recommended audio settings when connecting your OSMC device to your AVR/soundbar’s S/PDIF input

Go to Settings/System/Audio… Select the following settings:

Audio device:

Vero 2, 4K/4K +: PCM or HDMI

Vero 1: S/PDIF

Raspberry Pi: your S/PDIF soundcard

Number of channels: 2.0 (S/PDIF only supports 2-channel LPCM)

Output configuration: Best match

Passthrough: enabled (on Raspberry Pi select Passthrough device: your S/PDIF soundcard)

DTS/AC3 passthrough: enabled

DTS-HD passthrough: disabled (only present on Vero 1 and Vero 4K/4K +)

TrueHD passthrough: disabled (only present on Vero 1 and Vero 4K/4K +)

E-AC3 passthrough: disabled

AC3 transcoding: enabled (enable this if you don’t want multi-channel LPCM and HD audio down-mixed to 2.0 LPCM, also see the explanation of AC3 transcoding a bit further down)

Keep in mind to disable “Sync playback to display” under Settings/Player/Videos for passthrough to work!