December update failed on RPI 2

Help and Support Raspberry Pi
1

Hi,

Yesterday OSMC asked me if I wanted to install the new update, I accepted but it failed to install. Everything started again. I wanted the new version to be installed so I connected with ssh and did

sudo apt-get update;sudo apt-get upgrade

and got this error in return :

sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y rbp2-kernel-osmc-2-osmcwhile processing:edosmc (--configure):-osmc:tatus 255 at /var/lib/dpkg/info/rbp2-image-4.3.3-2-osmc.postinst line 334...................................................................................................] Un E: Sub-process /usr/bin/dpkg returned an error code (1) osmc@osmc:~$

in the process I got some advice to do a :
sudo apt-get autoremove

Which l told me that I was running 4.3.3.1 version and removing it would be a critical error, so I didn’t.

doing :
sudo apt-get install -v
did not solve anything neither.

Would someone have a suggestion?

2

I assume you mean sudo apt-get install -f or?

3

yeah my bad … -f

4

So you mean yu used -f and it didn’t resolved?
Paste the output and also grab-logs -A

5

Exception Details:

Traceback (most recent call last):
File “/usr/bin/grab-logs”, line 636, in dispatch_logs
raise ValueError(‘Upload Returned Empty String’)
ValueError: Upload Returned Empty String

Failed to upload log files, copying to /boot instead. (Unable to verify)

6

Looks like your SD card failed.

try dmesg | paste-log

7 
 dmesg
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.3.3-1-osmc (root@vero) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Sat Dec 26 22:15:38 UTC 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] cma: Reserved 8 MiB at 0x2e800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 192512
[    0.000000] free_area_init_node: node 0, pgdat 80bbca80, node_mem_map ae156000
[    0.000000]   Normal zone: 1692 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192512 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9460->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 13 pages/cpu @ae114000 s23488 r8192 d21568 u53248
[    0.000000] pcpu-alloc: s23488 r8192 d21568 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190820
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2709.boardrev=0xa01041 bcm2709.serial=0x67d1a39b smsc95xx.macaddr=B8:27:EB:D1:A3:9B bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet osmcdev=rbp2
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 741160K/770048K available (7857K kernel code, 544K rwdata, 1844K rodata, 1776K init, 762K bss, 20696K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xaf800000 - 0xff000000   (1272 MB)
    lowmem  : 0x80000000 - 0xaf000000   ( 752 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x80981a30   (9703 kB)
      .init : 0x80982000 - 0x80b3e000   (1776 kB)
      .data : 0x80b3e000 - 0x80bc62dc   ( 545 kB)
       .bss : 0x80bc9000 - 0x80c87b2c   ( 763 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:608
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000033] Switching to timer-based delay loop, resolution 52ns
[    0.000312] Console: colour dummy device 80x30
[    0.000532] console [tty0] enabled
[    0.000561] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000588] pid_max: default: 32768 minimum: 301
[    0.000942] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000962] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002249] Initializing cgroup subsys io
[    0.002309] Initializing cgroup subsys memory
[    0.002347] Initializing cgroup subsys devices
[    0.002373] Initializing cgroup subsys freezer
[    0.002396] Initializing cgroup subsys net_cls
[    0.002471] CPU: Testing write buffer coherency: ok
[    0.002550] ftrace: allocating 19249 entries in 57 pages
[    0.049705] CPU0: update cpu_capacity 1024
[    0.049744] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.049760] [bcm2709_smp_prepare_cpus] enter
[    0.049904] Setting up static identity map for 0x8240 - 0x8298
[    0.129301] [bcm2709_boot_secondary] cpu:1 started (0) 16
[    0.129660] [bcm2709_secondary_init] enter cpu:1
[    0.129720] CPU1: update cpu_capacity 1024
[    0.129729] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.159328] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.159610] [bcm2709_secondary_init] enter cpu:2
[    0.159646] CPU2: update cpu_capacity 1024
[    0.159654] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.189410] [bcm2709_boot_secondary] cpu:3 started (0) 16
[    0.189662] [bcm2709_secondary_init] enter cpu:3
[    0.189694] CPU3: update cpu_capacity 1024
[    0.189702] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.189795] Brought up 4 CPUs
[    0.189824] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.189834] CPU: All CPU(s) started in HYP mode.
[    0.189843] CPU: Virtualization extensions available.
[    0.190725] devtmpfs: initialized
[    0.214281] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.214794] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.215892] pinctrl core: initialized pinctrl subsystem
[    0.216687] NET: Registered protocol family 16
[    0.222141] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.249594] cpuidle: using governor ladder
[    0.279623] cpuidle: using governor menu
[    0.285697] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.285717] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.285906] Serial: AMBA PL011 UART driver
[    0.286212] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
[    0.286910] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.371357] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.372737] bcm2835-dma 3f007000.dma: dma_debug:0
[    0.373324] SCSI subsystem initialized
[    0.373576] usbcore: registered new interface driver usbfs
[    0.373687] usbcore: registered new interface driver hub
[    0.373846] usbcore: registered new device driver usb
[    0.379865] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-12-08 14:44
[    0.407009] clocksource: Switched to clocksource arch_sys_counter
[    0.458451] FS-Cache: Loaded
[    0.458896] CacheFiles: Loaded
[    0.475228] NET: Registered protocol family 2
[    0.476479] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.476621] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.476813] TCP: Hash tables configured (established 8192 bind 8192)
[    0.476937] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.477088] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.477593] NET: Registered protocol family 1
[    0.478079] RPC: Registered named UNIX socket transport module.
[    0.478095] RPC: Registered udp transport module.
[    0.478105] RPC: Registered tcp transport module.
[    0.478116] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.590219] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.592836] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.593028] audit: initializing netlink subsys (disabled)
[    0.593105] audit: type=2000 audit(0.559:1): initialized
[    0.608619] VFS: Disk quotas dquot_6.6.0
[    0.609021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.611848] FS-Cache: Netfs 'nfs' registered for caching
[    0.612999] NFS: Registering the id_resolver key type
[    0.613070] Key type id_resolver registered
[    0.613081] Key type id_legacy registered
[    0.616476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.616670] io scheduler noop registered
[    0.617311] io scheduler bfq registered (default)
[    0.617327] BFQ I/O-scheduler version: v7r7
[    0.619870] BCM2708FB: allocated DMA memory eec00000
[    0.619920] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.636087] Console: switching to colour frame buffer device 160x45
[    0.647296] vc-cma: Videocore CMA driver
[    0.647313] vc-cma: vc_cma_base      = 0x00000000
[    0.647325] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.647335] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.647611] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    0.667834] brd: module loaded
[    0.709179] loop: module loaded
[    0.710340] vchiq: vchiq_init_state: slot_zero = 0xaec80000, is_master = 0
[    0.712095] Loading iSCSI transport class v2.0-870.
[    0.723072] usbcore: registered new interface driver smsc95xx
[    0.723147] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.933529] Core Release: 2.80a
[    0.933552] Setting default values for core params
[    0.933577] Finished setting default values for core params
[    1.134017] Using Buffer DMA mode
[    1.134033] Periodic Transfer Interrupt Enhancement - disabled
[    1.134044] Multiprocessor Interrupt Enhancement - disabled
[    1.134057] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.134074] Dedicated Tx FIFOs mode
[    1.134522] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xaec14000 dma = 0xeec14000 len=9024
[    1.134561] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[    1.134586] dwc_otg: Microframe scheduler enabled
[    1.134654] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8056314c
[    1.134673] WARN::hcd_init_fiq:414: FIQ ASM at 0x805634bc length 36
[    1.134693] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaf89a000
[    1.134744] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.134800] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.134853] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
[    1.134906] Init: Port Power? op_state=1
[    1.134916] Init: Power Port (0)
[    1.135240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.135260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.135277] usb usb1: Product: DWC OTG Controller
[    1.135293] usb usb1: Manufacturer: Linux 4.3.3-1-osmc dwc_otg_hcd
[    1.135308] usb usb1: SerialNumber: 3f980000.usb
[    1.136428] hub 1-0:1.0: USB hub found
[    1.136496] hub 1-0:1.0: 1 port detected
[    1.137299] dwc_otg: FIQ enabled
[    1.137314] dwc_otg: NAK holdoff enabled
[    1.137325] dwc_otg: FIQ split-transaction FSM enabled
[    1.137366] Module dwc_common_port init
[    1.137747] usbcore: registered new interface driver usb-storage
[    1.138141] mousedev: PS/2 mouse device common for all mice
[    1.138766] usbcore: registered new interface driver usbtouchscreen
[    1.139233] bcm2835-cpufreq: min=600000 max=900000
[    1.141731] sdhci: Secure Digital Host Controller Interface driver
[    1.141740] sdhci: Copyright(c) Pierre Ossman
[    1.217058] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.237521] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.238064] ledtrig-cpu: registered to indicate activity on CPUs
[    1.238243] hidraw: raw HID events driver (C) Jiri Kosina
[    1.238417] usbcore: registered new interface driver usbhid
[    1.238425] usbhid: USB HID core driver
[    1.238778] Initializing XFRM netlink socket
[    1.238811] NET: Registered protocol family 17
[    1.238954] Key type dns_resolver registered
[    1.239093] Registering SWP/SWPB emulation handler
[    1.239961] registered taskstats version 1
[    1.240156] vc-sm: Videocore shared memory driver
[    1.240170] [vc_sm_connected_init]: start
[    1.240689] [vc_sm_connected_init]: end - returning 0
[    1.243564] Freeing unused kernel memory: 1776K (80982000 - 80b3e000)
[    1.337198] Indeed it is in host mode hprt0 = 00021501
[    1.517052] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.517201] Indeed it is in host mode hprt0 = 00001101
[    1.575162] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.577315] mmc0: new high speed SDHC card at address 0003
[    1.578065] mmcblk0: mmc0:0003 SD16G 14.4 GiB 
[    1.579562]  mmcblk0: p1 p2
[    1.717365] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.717387] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.727972] hub 1-1:1.0: USB hub found
[    1.728148] hub 1-1:1.0: 5 ports detected
[    2.007034] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.107307] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.107324] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.110185] smsc95xx v1.0.4
[    2.170230] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:a3:9b
[    2.784797] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.795025] fsck: E2fsck run: /bin/e2fsck -p -C 0 /dev/mmcblk0p2
[    2.795259] fsck: Filesystem UUID: bd7f3ecb-3de1-45ff-b962-df05ceb6de9a
[    2.795503] fsck: /dev/mmcblk0p2: clean, 51604/930240 files, 483880/3718912 blocks
[    3.187074] usb 1-1.5: new high-speed USB device number 4 using dwc_otg
[    3.328746] usb 1-1.5: New USB device found, idVendor=0bc2, idProduct=ab05
[    3.328773] usb 1-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    3.328784] usb 1-1.5: Product: BUP Slim BK
[    3.328795] usb 1-1.5: Manufacturer: Seagate
[    3.328805] usb 1-1.5: SerialNumber: NA4TEJ97
[    3.329746] usb 1-1.5: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[    3.329763] usb 1-1.5: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[    3.329777] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[    3.330555] scsi host0: usb-storage 1-1.5:1.0
[    4.064114] random: systemd urandom read with 67 bits of entropy available
[    4.118691] NET: Registered protocol family 10
[    4.328175] scsi 0:0:0:0: Direct-Access     Seagate  BUP Slim BK      0304 PQ: 0 ANSI: 6
[    4.329849] sd 0:0:0:0: [sda] 976773167 512-byte logical blocks: (500 GB/465 GiB)
[    4.440247] systemd[1]: [/lib/systemd/system/multi-user.target:13] Failed to add dependency on s, ignoring: Invalid argument
[    4.482877] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    4.483095] systemd[1]: Found ordering cycle on sysinit.target/start
[    4.483118] systemd[1]: Found dependency on kbd.service/start
[    4.483138] systemd[1]: Found dependency on remote-fs.target/start
[    4.483155] systemd[1]: Found dependency on remote-fs-pre.target/start
[    4.483171] systemd[1]: Found dependency on connman.service/start
[    4.483188] systemd[1]: Found dependency on dbus.service/start
[    4.483204] systemd[1]: Found dependency on basic.target/start
[    4.483220] systemd[1]: Found dependency on sysinit.target/start
[    4.483237] systemd[1]: Breaking ordering cycle by deleting job kbd.service/start
[    4.483258] systemd[1]: Job kbd.service/start deleted to break ordering cycle starting with sysinit.target/start
[    4.483539] systemd[1]: Found ordering cycle on sysinit.target/start
[    4.483563] systemd[1]: Found dependency on rpcbind.service/start
[    4.483582] systemd[1]: Found dependency on network-online.target/start
[    4.483598] systemd[1]: Found dependency on network.target/start
[    4.483615] systemd[1]: Found dependency on connman.service/start
[    4.483631] systemd[1]: Found dependency on dbus.service/start
[    4.483647] systemd[1]: Found dependency on basic.target/start
[    4.483664] systemd[1]: Found dependency on sysinit.target/start
[    4.483681] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[    4.483700] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with sysinit.target/start
[    4.625115] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.689831] fuse init (API version 7.23)
[    4.893939] systemd-udevd[200]: starting version 215
[    5.093864] lirc_dev: IR Remote Control driver registered, major 244 
[    5.113428] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
[    5.134193] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    5.171678] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    5.358852] usbcore: registered new interface driver uas
[    5.390449] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.540330] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.067153] lirc_rpi: auto-detected active high receiver on GPIO pin 18
[    6.069154] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
[    6.069184] lirc_rpi: driver registered!
[    6.445046] systemd-journald[172]: Received request to flush runtime journal from PID 1
[    6.700773] sd 0:0:0:0: [sda] Write Protect is off
[    6.700804] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[    6.701289] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.778380]  sda: sda1 sda2
[    6.781094] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.216452] input: lircd as /devices/virtual/input/input0
[    7.792581] random: nonblocking pool is initialized
[    8.229222] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    8.229459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.528574] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    9.872057] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.873593] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[    9.933252] 8021q: 802.1Q VLAN Support v1.8
[   14.705286] Console: switching to colour dummy device 80x30
8

So how come you don’t have an internet connection?

9

think I get one :

    osmc@osmc:~$ ping 8.8.8.8
    PING 8.8.8.8 (8.8.8.8): 56 data bytes
    64 bytes from 8.8.8.8: seq=0 ttl=45 time=34.270 ms
    64 bytes from 8.8.8.8: seq=1 ttl=45 time=34.204 ms
    64 bytes from 8.8.8.8: seq=2 ttl=45 time=37.443 ms
    ^C
    --- 8.8.8.8 ping statistics ---
    3 packets transmitted, 3 packets received, 0% packet loss
    round-trip min/avg/max = 34.204/35.305/37.443 ms
10

Strange, didn’t paste log complained about it?

Can you post the output from mount

11

osmc@osmc:~$ mount devtmpfs on /dev type devtmpfs (rw,relatime,size=370580k,nr_inodes=92645,mode=755) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime) tmpfs on /run type tmpfs (rw,relatime) /dev/mmcblk0p2 on / type ext4 (rw,noatime,stripe=1024,data=ordered) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd) cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset) cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct) cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio) cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices) cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer) cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=23,pgrp=1,timeout=300,minproto=5,maxproto=5,direct) debugfs on /sys/kernel/debug type debugfs (rw,relatime) mqueue on /dev/mqueue type mqueue (rw,relatime) configfs on /sys/kernel/config type configfs (rw,relatime) fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime) /dev/mmcblk0p1 on /boot type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) sysfs on /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq type sysfs (rw,relatime) /dev/sda1 on /media/EFI type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0111,dmask=0000,allow_utime=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,utf8,errors=remount-ro,uhelper=udisks) /dev/sda2 on /media/USBHDD type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks) tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=75116k,mode=700,uid=1000,gid=1000)

12

Looks ok, therefore no idea why paste-logs and grab-logs is failing

13

me neither :frowning:

14

The kernel upgrade is potentially failing due to filesystem corruption. A corrupt Perl package could cause this.

I would recommend checking your peripherals and reinstalling

15

Hi,
I just have a usb hdd as peripherals… what kind of check would you recommend before complete re-install?