quick question, i try to ftp from my seedbox to my osmc rpi but seems like all transfers fail. i’m connected through FTPRUSH as filezilla doesnt allow site 2 site transfer
This might be of some assistance:
thanks but still doesn’t work
looks like i completly killed vsftpd now
osmc@osmc:~$ systemctl status vsftpd * vsftpd.service - vsftpd FTP server Loaded: loaded (/lib/systemd/system/vsftpd.service; enabled) Active: failed (Result: exit-code) since Mon 2017-10-16 20:56:22 WEST; 9s ago Process: 32108 ExecStart=/usr/sbin/vsftpd /etc/vsftpd.conf (code=exited, status=2) Process: 32106 ExecStartPre=/bin/mkdir -p /var/run/vsftpd/empty (code=exited, status=0/SUCCESS) Main PID: 32108 (code=exited, status=2)
i think its because i did this
osmc@osmc:~$ sudo /etc/init.d/vsftpd restart [ ok ] Restarting vsftpd (via systemctl): vsftpd.service. -- Logs begin at Thu 1970-01-01 00:00:04 WET, end at Mon 2017-10-16 21:04:52 WEST. -- Oct 16 21:04:11 osmc systemd: Started vsftpd FTP server. -- Subject: Unit vsftpd.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit vsftpd.service has finished starting up. -- -- The start-up result is done. Oct 16 21:04:11 osmc sudo: pam_unix(sudo:session): session closed for user root Oct 16 21:04:11 osmc systemd: vsftpd.service: main process exited, code=exited, status=2/INVALIDARGUMENT Oct 16 21:04:11 osmc systemd: Unit vsftpd.service entered failed state. Oct 16 21:04:29 osmc sudo: osmc : TTY=pts/0 ; PWD=/home/osmc ; USER=root ; COMMAND=/bin/systemctl reload vsftpd Oct 16 21:04:29 osmc sudo: pam_unix(sudo:session): session opened for user root by osmc(uid=0) Oct 16 21:04:29 osmc systemd: Unit vsftpd.service cannot be reloaded because it is inactive. Oct 16 21:04:29 osmc sudo: pam_unix(sudo:session): session closed for user root Oct 16 21:04:52 osmc sudo: osmc : TTY=pts/0 ; PWD=/home/osmc ; USER=root ; COMMAND=/bin/journalctl -xn Oct 16 21:04:52 osmc sudo: pam_unix(sudo:session): session opened for user root by osmc(uid=0)
Nope. It’s likely to be something else. If you’ve configured it, look there. Here’s a brand new install of vsftpd.
osmc@osmc:~$ systemctl status vsftpd ● vsftpd.service - vsftpd FTP server Loaded: loaded (/lib/systemd/system/vsftpd.service; enabled) Active: active (running) since Mon 2017-10-16 21:12:27 BST; 2min 55s ago Main PID: 2709 (vsftpd) CGroup: /system.slice/vsftpd.service └─2709 /usr/sbin/vsftpd /etc/vsftpd.conf osmc@osmc:~$ sudo /etc/init.d/vsftpd restart [ ok ] Restarting vsftpd (via systemctl): vsftpd.service. osmc@osmc:~$ systemctl status vsftpd ● vsftpd.service - vsftpd FTP server Loaded: loaded (/lib/systemd/system/vsftpd.service; enabled) Active: active (running) since Mon 2017-10-16 21:17:46 BST; 16s ago Process: 2766 ExecStartPre=/bin/mkdir -p /var/run/vsftpd/empty (code=exited, status=0/SUCCESS) Main PID: 2769 (vsftpd) CGroup: /system.slice/vsftpd.service └─2769 /usr/sbin/vsftpd /etc/vsftpd.conf
Ideally, you should be using
sudo systemctl restart vsftpd now, rather than
sudo /etc/init.d/vsftpd restart.
yes now i fixed it as it seems the .conf got corrupted. i copied the one from osmc github but now it keeps asking me for user and pass eventhough i already input them.maybe you can upload urs?or a default one
EDIT: GOt in but still can’t fxp
500 OOPS: vsf_sysutil_bind
osmc@osmc:~$ cat /etc/vsftpd.conf # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=NO # # This directive enables listening on IPv6 sockets. By default, listening # on the IPv6 "any" address (::) will accept connections from both IPv6 # and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6 # sockets. If you want that (perhaps because you want to listen on specific # addresses) then you must run two copies of vsftpd with two configuration # files. listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. #write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). # (Warning! chroot'ing can be very dangerous. If using chroot, make sure that # the user does not have write access to the top level directory within the # chroot) #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Customization # # Some of vsftpd's settings don't fit the filesystem layout by # default. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key ssl_enable=NO
It works on my LAN (no configuration):
ftp 192.168.8.33 Connected to 192.168.8.33 (192.168.8.33). 220 (vsFTPd 3.0.2) Name (192.168.8.33:user): osmc 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> quit 221 Goodbye.
thanks but did you try fxping between 2 FTPs?
[T] PROT C
[T] Connexion en cours a ftp://osmc:***@192.xxxxxxxx
[T] Connexion en cours a 192.xxxxxxx:21
[T] 220 OSMC FTP Server
[T] USER osmc
[T] 331 Please specify the password.
[T] PASS (hidden)
[T] 230 Login successful.
[T] 215 UNIX Type: L8
[T] TYPE A
[T] 200 Protection set to Clear
[T] 200 Switching to ASCII mode.
[T] REST STREAM
[T] 211 End
[T] 257 “/home/osmc”
[T] 227 Entering Passive Mode (37,48,111,139,248,165).
[T] PORT 37,48,111,139,248,165
[T] 200 PORT command successful. Consider using PASV.
[T] STOR test2.txt
[T] 500 OOPS: vsf_sysutil_bind
No. I only did what I posted,
ok, need to figure out what the 500 vsf_sysutil_bind error means