Graphics glitches after dist-upgrade to March 2025

Help and Support Vero 4K / Vero 4K +
1

Today I reactivated my Vero 4k after a long time after I abandoned it due to unstable wifi connectivity. After a dist upgraded it to OSMC March 2025 I learned that the device has reached end of support. I would have loved to continue using it but it seems the latest upgrade also introduced graphics glitches. These horizontal stripes flicker, vanish and reappear. I tried disallowing hardware acceleration in Settings > Player > Videos to no avail. Any ideas what I could try?

XFAPGcZET9WFVQURb072WQ_63d3394bf999e961a40679f98a00c86061c55f36
XFAPGcZET9WFVQURb072WQ_63d3394bf999e961a40679f98a00c86061c55f361920×1440 494 KB

Grab-log upload: https://paste.osmc.tv/uwayeharek

2

Hi

Do you see this issue throughout, i.e. on the splash screen when booting as well?

Sam

3

Hi, the splash screen is fine.

4

While those stripes are not typical of HDMI cable problems, see if using a different input on your TV helps, try a different HDMI cable and/or clean the plugs with contact cleaner.

I note your TV claims to do 10 bits but it can’t do that at 1080p60. Try setting YUV422 output. It may not cure the glitches but videos will look better.

5

Stripes persists for different input, different HDMI cable, different monitor, different resolutions, different refresh rates.

1 Like
6

Thanks for testing. I can only suggest a reinstall unless @sam_nazarko has other ideas.

7

Nothing immediate springs to mind. I’d say reinstall is a good suggestion from Graham.