Osmc image new install empty partition

Help and Support Raspberry Pi
1

Hi
I did did download the image from :slight_smile:osmc image link rpi2

buring the image to the sd card (ubuntu ) gnome-disk.
I am ending up with 2 partitions on an 8 gb card but filesytem is empty.

what am I missing?

thx

2

The filesystem is in filesystem.tar.xz. Is that missing?

3

Did you boot the system and let the installer create the partitions?

4

looks like this is missing

5

do you have the link for filesystem.tar.xz?

found it here.
http://mirrors.mit.edu/osmc/osmc/download/filesystems/

just to untar to partoition?

6

Just boot the system normally and it will partition everything for you.

7

but the system is not booting with the image file for me?
nothing is hapening?

0osmcScreenshot from 2020-02-26 15-06-43
0osmcScreenshot from 2020-02-26 15-06-43556×509 38 KB

8

Can you mount the SD card and ls the contents?

9

yes mounted on ubuntu computer

ls
    ls
bcm2708-rpi-b.dtb         bcm2835-rpi-a-plus.dtb    bootcode.bin
bcm2708-rpi-b-plus.dtb    bcm2835-rpi-b.dtb         cmdline.txt
bcm2708-rpi-cm.dtb        bcm2835-rpi-b-plus.dtb    config.txt
bcm2708-rpi-zero.dtb      bcm2835-rpi-b-rev2.dtb    filesystem.tar.xz
bcm2708-rpi-zero-w.dtb    bcm2835-rpi-cm1-io1.dtb   fixup4cd.dat
bcm2709-rpi-2-b.dtb       bcm2835-rpi-zero.dtb      fixup_cd.dat
bcm2710-rpi-3-b.dtb       bcm2835-rpi-zero-w.dtb    kernel.img
bcm2710-rpi-3-b-plus.dtb  bcm2836-rpi-2-b.dtb       overlays
bcm2710-rpi-cm3.dtb       bcm2837-rpi-3-b.dtb       start4cd.elf
bcm2711-rpi-4-b.dtb       bcm2837-rpi-3-b-plus.dtb  start_cd.elf
bcm2835-rpi-a.dtb         bcm2838-rpi-4-b.dtb
10

on rpi only red and geenish led static on, no blinking

11

Are you sure you aren’t using a Rpi B as opposed to a B 2/3?

How are you powering the device?

12

Hi

it is a rpi 2 model b v 1.1

But had osmc running on it already.

same powerdevice.

Do I need to use a differrent image?

normal debian stretch running with samehardware config

I am confused