OSMC with HDMI switch

[darwindesign]

I think you will find this issue covered in the following thread…

RPi3 HDMI not working after boot despite hdmi_force_hotplug

Hi! I am using a Raspberry PI 3 witch OSMC 2022.03-01 and a Philips Screeneo connected via HDMI. As the Screeneo takes quite some tiime to start, the Raspberry Pi boots up before the Screeneo is ready and therefore does not detect the HDMI device and turns HDMI output off. The only thing that works to get the HDMI output is to reboot the Raspberry after the Screeneo is ready. I played around with the HDMI-settings in /boot/config-user.txt that were suggested in other forum-entries, but non of …