Raspberry 2 OSMC + DSM.5 Synology - Problem with NFS

[theobald]

Hello everyone,

I’m very new with Raspberry OSMC and even with my synology NAS…
I managed to install the lastest version of OSMC on my new Raspberry Pi, everything’s working like a charm…
After that i tried to add a video folder from my DS214+, i tried using both SMB and NFS, i followed all the step from this official guide http://kodi.wiki/view/NFS#Synology

Buy following this guide step by step, i managed to see all my shared folder on my syno but i can’t get any acess to them…

I tried a lot of things including following thoses steps raspbian - Mount NFS Folder share on RPi from a synology NAS - Raspberry Pi Stack Exchange

but i still can’t use my RaspBerry PI with my synology : …

I don’t really know what to do so i’m asking you for a litlle help,

thanks by advance and sorry for my english

[CaNsA]

This has been mentioned several times before.

You need to set the “insecure” flag on your server side nfs shares.

Kodi alpha 3 NFS browsing

I had a problem with OSMC not being able to connect to my NFS shares, turns out it was because OSMC connects on high numbered ports. I hit a snag when accessing the NFS shares from OSMC… ERROR: NFS: Failed to mount nfs share: /export/Films (mount/mnt call failed with "RPC error: Mount failed with error MNT3ERR_ACCES(13) Permission denied(13)") Checked the syslog on NobKitten (my server), NobKitten rpc.mountd[4098]: refused mount request from 192.168.1.15 for /export/Films (/export/Films): ill…

[Theetjuh]

My /etc/exports looks like:

/volume1/video  192.168.1.2(rw,async,no_wdelay,insecure,all_squash,insecure_locks,sec=sys,anonuid=1024,anongid=100)  192.168.1.3(rw,async,no_wdelay,insecure,all_squash,insecure_locks,sec=sys,anonuid=1024,anongid=100)

[theobald]

Thank you for your answer, i’m going to try that as soon as i will get home, sorry if i didn’t look enough for a solution !

[sam_nazarko]

Hi there,

NFS mounts should be improved a bit with the Release Candidate. Let me know if you’re still having some trouble.

Read https://osmc.tv/2015/03/osmc-release-candidate/ for some more information

Sam

[theobald]

Hi,

i run a clean install of the Release Candidate and then i created new shared folders with new NFS permissions and everythings seems to rune fine

thank you all for your answer, and thank you sam for this new release !!

[DAVIZINHO]

hello,
i have the same problem like you.
Raspberry pi2 OSM RC2 + DSM5.1 synology
i can see the NFS folder but i can´t enter on it.
It works fine with other SO like openelec

This night i will try to create a new FOLDER, but its a problem for me to re-create all the folders

[Titiftw]

Hi All,

I know the post is already quite old but I was facing the same issue while setting up my Synology on my Raspberry 3 - OSMC.
After some investigation, I was able to access my NAS from my Raspberry via the NFS protocol. The configuration was a bit tricky. Therefore, I’d like to share it with you!

[https://i.imgur.com/3C4tJdz.png] (http://Permissions)

[https://i.imgur.com/5w0YAW4.png](http://NFS configuration)

(Sorry, in French)

The solution for me was to use ‘192.168.1.1/255.255.255.0’ as Client instead of ‘*’ - which is not restrictive in my opinion - thus only people on my local network can access it.
Then, to grant permissions to ‘Everyone’ - just read access.

Finally, I was able to mount the NFS from command line; thus I assumed that it would work from the Pi & indeed, it did the trick!

Hope it can help you!