Same problem here with HifiBerry DacPlus.
@dacapo looking at the forums there are a few people saying there are a few things wrong with the January update hope this can get resolved soon do you know how to go back to the previous version ??
It seems related to a 2 line patch from january 12 (affecting the kernel and ALSA).
@Fredouye how is this resolved friend ??
Try adding dtparam=audio=off to your config.txt
having a Digi+ and I can confirm it works again after editing my config.txt with the parameter dtparam=audio=off
Had to correct the settings in the system–audio in Kodi
Thanks for confirming
This didn’t solve it for me. the DAC is available again in system - audio but still no sound
Works for me, too. Thanks for this quick solution.
Did you check audio hardware settings in Kodi config?
yep works for me thanks all for the help
I checked the OSMC config. The overlay was set to Hifiberry DAC. I changed it to Hifiberry DAC + and now it works.
I must have changed it whiole troubleshooting and didn’t notice the difference.
Thanks for the help
My IQaudIO Pi DAC Plus is no longer working too with January update. I tried changing settings and rebooting then changing them back. didn’t help.
adding… dtparam=audio=off fixed it for now
Digi+ now back working with the dtparam fix, thanks for sorting so quickly and easily. Cant access Pi Config but not really a problem for me.
This indicated an issue with the format in config.txt. Please provide a debug log when you try to access PiConfig.
To get a better understanding of the problem you are experiencing we need more information from you. Please see http://osmc.tv/wiki/general/how-to-submit-a-useful-support-request/ for advice on how to help us.
Fix didn’t work for me. It restored the entry in the settings menu. Selecting it gives a soft ‘pop’ from the speakers, but it’s impossible to get any other sound out of it.
Note: This is using the Hifiberry DAC+
I also noted I suddenly had two dtoverlay entries in my config.txt I removed the one that read dtoverlay=hifiberry-dacplus-overlay since it should be dtoverlay=hifiberry-dacplus
Note2: I also tested the option dtoverlay=hifiberry-dacplus-overlay just to be sure. But that doesn’t work either.
Note3: running speaker-test will always reply: Playback open error: -16,Device or resource busy
[ +0.080973] snd-rpi-hifiberry-dacplus sound: ASoC: CODEC DAI pcm512x-hifi not registered
[ +0.000025] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
[ +0.021800] snd-rpi-hifiberry-dacplus sound: ASoC: CODEC DAI pcm512x-hifi not registered
[ +0.000026] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
[ +0.045411] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ +0.000026] cdrom: Uniform CD-ROM driver Revision: 3.20
[ +0.001711] usbcore: registered new interface driver uas
[ +0.001847] snd-rpi-hifiberry-dacplus sound: ASoC: CODEC DAI pcm512x-hifi not registered
[ +0.000028] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
But aplay -l correctly shows:
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_dacplus], device 0: HiFiBerry DAC+ HiFi pcm512x-hifi-0
Subdevice #0: subdevice #0
Adding dtparam=audio=off to /boot/config, rebooting and selecting IQaudIODAC Analog from Kodi settings freezes my system instantly. If the DAC is selected before reboot, the system freezes at the OSMC logo.
Usings a fresh install of January 2016 image, installed with OSMC installer. Raspberry Pi B+ with IQaudIO DAC+.
EDIT: Somehow there was two dtoverlay entries in config.txt. When I removed the line dtoverlay=lirc-rpi it began working.
i’m using es9023 dac on rpi2 with osmc
I’ve made settings like below :
sudo apt-get install alsa-utils
sudo nano /etc/modules
Adding the content below, store them by “Ctrt+X” and then withdrawl
In Settings > System > Audio Output I can select** ALSA: Default(snd_rpi_gifiberry_dac Analog)** but at this moment system is hangs.
who can help me .thanks.