Not booting after December update

2 posts were split to a new topic: Error installing mediacenter packet

Got same problem here, after updating to December release. Downloaded overlay and edited config.txt with mmc option, as suggested, now my RBPi2 is fully functional. Please add my card for reference : A-DATA 32GB UHS-I U1 (S/N on the back : G32G1208231159).
Thank you guys for all your hard work!

I can confirm that Sam’s fix works for my RPI2 with a Transcend TS32GUSDHC10 (32 GB) SD card. The exact same thing as OP happened to me around 2 AM and I couldn’t find this thread for some reason, so ended up reflashing to get it back up. Happened again the next morning (now) and the suggested fix worked, so leaving this here to help other people with this SD card to find this thread. =]

A small update to this issue - we have built a new Pi kernel (4.3.3-2) which includes the missing mmc-overlay.dtb file, so anybody updating to the December release from today onwards who experiences this problem, it is sufficient to just add dtoverlay=mmc to /boot/config.txt to revert to the mmc driver - no downloading and copying of the dtb file is necessary now. (Also make sure there is no line that says dtoverlay=sdhost in config.txt)

If you are using a Noobs install, hold shift when booting and use the config.txt editor for your OSMC install to add this line. If you are not using noobs, edit config.txt on the FAT32 partition of the SD card from a Mac/PC.

This change to config.txt can also be done pre-emptively before upgrading to the December release, if you think you have a card that may be affected.

Please continue to let us know the make and model of your SD card if you are affected, especially if it is not a Transcend card.

Thanks.

2 Likes

Sd card: ADATA Premier 16GB AUSDH16GUICL10-RA1

It’s on Raspberry Pi 2

i use the november build right now.

10 posts were split to a new topic: Dependency failed for Local File Systems after December update

Ok, after update to the December version
both overlays works fine (“SanDisk Mobile Ultra microSDXC 64GB UHS-I Class 10”)!

I’m a little bit confused:

  • which overlay is the faster one?
  • which is the default now (without any “dtoverlay=” in “/boot/config.txt”)?
  • which is the default in the future?

Many thanks!

Michael

The answer to all three questions is sdhost

Im not sure if anyone has looked at this already. I know it hangs on the splash screen and I know it hangs before loading the network or the usb dongle because I can’t ssh to it. Would it help and is there away to get a log of its boot activity and send to this board to look at. Im not sure how this is achieved but I bet it shows in all the boot up where it failed to load or initialize something.

Just an update on sd card status. My system is on a samsung evo 16 GB card. I have success with unplugging and plugging the power back in several times which I hate to do. I feel like I might as well blow in the sd card slot and fiddle with how I set the card into the port, NES reference :wink:

really, a machine mainly running linux and linux partitions and the file you download cant be read on ubuntu. Im going to try to slide the file over to the pi and hope it works. Im too lazy to reach 5 feet and do it on my girlfriends windows laptop.

Hi!

I am using a rpi2 with SanDisk Ultra 32 GB MicroSDHC UHS-I. I did not know about this issue and I updated two days ago (this implies that I should hav the new PI kernel (4.3.3-2)). The issue is that the rpi2 boots only to the first OSMC screen and then shows a sad smiley face.

I connected the SD card to my Macbook’s card reader and it shows two partitions - fat and ext, and as expected mounts only the fat one. In the fat partition there is no /boot/ folder. However there is a config.txt file, but it is read-only and I cannot save the files after adding the new line. Thus my question is if I need access to the ext partition, or this fat partition is the right one. If fat is the right one, how come I don’t have the /boot/ folder. If it is okay that I don’t have the /boot/ folder, how do I save the config.txt file (I don’t have permissions to save it).

I really hope someone can help me - honestly this situation is unacceptable.

Thanks

It is the FAT partition you wish to edit. You don’t see a /boot directory as that is the directory the FAT partition is mounted under on OSMC

Can you try using a PC? Otherwise you may need to mount the partition RW, not sure if Mac needs special treatment there, but I doubt it as our installer doesn’t do anything special for preseeding

Mine card also stuck at OSMC screen, mmc method is working. My card:
ADATA Micro SDHC Premier 32GB UHS-I + adaptér AUSDH32GUICL10-RA1

Lexar LSDMI16GBB1NL300A 16Gb High-Performance 300x microSDHC/microSDXC UHS-I

Purchased 01-12-2015

Fixed with overlay=mmc

Thanks for the solution!

Thanks for the quick reply. Unfortunately I do not have access to a Windows PC. Can you please elaborate what you mean by “Otherwise you may need to mount the partition RW” and how to achieve this in Mac OS X? Thanks

I don’t have a Mac so can’t help much with that one. I would recommend posting a screenshot of what you see so another OS X user can perhaps help

I did it in mac os - when you insert card in your computer, /boot would mount as new drive so only put mmc-overlay.dtb into overlays folder.

A post was split to a new topic: Stuck on Rainbow screen

The mmc-overlay.dtb file is already in the Overlay folder. Any other suggestions? Thanks!