The 3D resolution modes are listed separately from the 2D modes. If your device is not getting the EDID from its display we need to specify the 3D modes in a file called disp_cap_3d. But we don’t know what modes your TV supports unless you can connect a good vero to it and get the logs.
If you are sure this problem started only when you upgraded to 19.3, you could reinstall 19.1 from the August 2021 release.
Ok thanks for explanation. The ‘bad’ one is in a children bedroom, so i’ll will post it tomorow.
I would prefere to stay in 19.3 but if we don’t fine solution i will try to downgrade to 19.1…
Many thanks for support,
Downgrading is certainly not ideal, but if it cures the problem, we might, with logs, get an insight into why the latest release is not working.
Keen to see the logs.
Sam
Hello,
The ‘good’ vero log (on the bedroom cable and TV) is
https://paste.osmc.tv/siququdite
The 3D blueray is perfectly working, koidi is in 19.3, resolution is 1920x1080P (2D)
The “bad” vero log is :
https://paste.osmc.tv/necoromuyu
The 3D blueray ARE NOT working (i have “Mode 3D stereoscopic . monoscopic / 2D” message on screen), kodi is in 19.3, resolution is 1920x1080P (2D)
I hope it will help to investigate.
Many thanks to tell me what to do.
Instead of what @JohanBakker suggested, your disp_cap file on the ‘bad’ vero should look like this:
480p60hz
576p50hz
720p50hz
720p60hz
1080p24hz
1080p25hz
1080p30hz
1080i50hz
1080p50hz
1080i60hz
1080p60hz*
and you need to make a new file ~/.kodi/usersettings/disp_cap_3d with these lines:
720p50hz FramePacking TopBottom SidebySide
720p60hz FramePacking TopBottom SidebySide
1080p24hz FramePacking TopBottom SidebySide
1080p30hz TopBottom SidebySide
1080i50hz TopBottom SidebySide
1080p50hz SidebySide
1080i60hz TopBottom SidebySide
1080p60hz SidebySide
That should give you the 3D modes you need. Let us know how it goes.
It’s perfectly work !! Yes !!
Many many thanks Grahamh and all of you for your support !!!
And happy new years !!